fabric color fastness to perspiration tester Test machine For Testing
Perspiration Tester is to determine colour fastness test to water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of 1 stainless steel frame with 21 acrylic separator plates to hold 20 samples. Thus the both ISO/AATCC test methods can be done in one time. 20 plastic basins are equipped for pre-treatment of samples.
Testing Standards:
ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714
Applications:
The Perspiration Tester is designed for color fastness test of various kinds of textile materials and textiles to perspiration, sea water, saliva, distilled water,etc.
Product Information:
The Perspiration Tester is widely used in determining the color fastness of textiles to perspiration, sea water, saliva and distilled water. The colored textile specimen combined together with the prescribed lining fabric is wet out in a simulated acid perspiration solution or others.After the wetting processed, the specimen combination is extruded to remove the excess fluid and sandwiched between the sample board, applied with specified pressure for a certain period of time. Then dry the specimen and the lining fabric seperately and observe the color change.
The stainless steel frame can hold 20 samples held between acrylic separator plates.Loading weights for AATCC, ISO and BS standards are included.Use It is equipped with a sweat color fastness oven and a chemical reagent kit for AATCC and ISO perspiration test, including 500g Sodium Chloride, 500g Sodium Dihydrogen Orthophosphate 2H2O, 500g Di-Sodium Hydrogen Orthophosphate 2H2O, 200g L-Histidine Monohydrochloride.
Technical Parameters:
A.Provided with a stainless steel frame, 2 loading weights and 21 acrylic separator plates.
B.The stainless steel frame with a capacity of 20 samples of 10cm×4 cm.
C.Each sample held between acrylic separator plates.
D.Different weights for different test standards and avoid misuse.
Accessories and Consumables:
1.Standard weights
2.Acrylic Plates
3.Sodium Chloride
4.Sodium hydroxide
5.Sodium Dihydrogen Orthophosphate·2H2O
6.Di-Sodium Hydrogen Orthophosphate·2H2O
7.Lactic Acid (USP 85)
8.Sodium Hydroxide
9.L-Histidine Monohydrochloride
Other supplier products
|
|
aatcc textile perspiration fastness tester |
Testing Standards:
ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/... |
|
|
Fabric softness tester |
Softness Tester, to determine the softness of leather and coated fabrics and other soft materials. Softness tester does not need samples to be cut ... |
|
|
AATCC 195 Moisture Management Tester |
Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Moisture management tester is the tool for the measurement, evaluation and classification of... |
|
|
Medical Mask Synthetic Blood Penetration Tester |
Surgical Masks Synthetic Blood Penetration Resistance TesterMedical Face Mask Synthetic Blood Penetration Resistance Tester is mainly used in the b... |
|
|
Curl elasticity detector |
Crimp elasticity detector is mainly used to determine the curl, curl elasticity, curl recovery rate and their statistical value of 1 ~ 22dtex fiber... |
All supplier products
Same products
