Full Face Mask Test Machine Combustion Tester
The Full Face Mask Test Machine Combustion Tester in simulating different edges, corners, surface at different heights and fall to the ground situation, then assess the damage to the product and its components. It can withstand the fall height and impact-resistant strength.
Standards:
GB 19083-2010, EN 149, GB 2626, YY 0469
Specifications:
1, head mold automatic movement line with the speed of (60 ± 5) mm / s
2, the height of the flame can be adjusted to 40 ± 4mm
3, with a flame temperature measurement detection thermocouple
4, the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm
6, the burner height adjustment range of 30mm
7, metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning
8, continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds
9, the power supply: AC220V, 50Hz, 50W
10, Weight: about 30kg
The Full Face Mask Test Machine Combustion Tester is widely used to test a variety of products packaged in the handling or transportation to test the caused damage inside the product, and for the prevention of pesticide in advance, can use the machine to be tested is expected to arrive the best solution, so as to minimize transit losses, and to assess the impact of electronic components dropping resistance by the strength in the handling; packaging containers Ling, angle, surface reliability of the equipment.
Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry. Qinsun specialize in the research and development of high quality lab instrument for textile testing industry. Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
Welcome to Contact us!
E-mail:
Whatsapp/
在线联系供应商
Other supplier products
 |
mouth mask flame retardant test machine | Mouth mask flame retardant test machine is used for flame retardant performance of medical masks, to test the flammability performance of medical m... |
 |
Flame-retardant medical mask tester | Flame-retardant medical mask tester is used for testing the anti-combustion performance of surgical Non-woven mask. Standards: GB 19083-2010, EN 1... |
 |
Rapid resistance differential pressure medical face masks tester | Medical Face Mask Air Exchange Pressure Difference Tester meets the standard requirements, which is YY0469-2004 "Medical surgical mask technical re... |
 |
Synthetic Blood Penetration Tester | Medical mask synthetic blood penetration tester is to determine the resistance of protective masks to the penetration of synthetic blood under diff... |
 |
Anti Synthetic blood penetration tester for protective clothing | Synthetic Blood Penetration Tester is used to test specimens of protective clothing and candidate materials and constructions to be used in protect... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
