BS EN 12600 Pendulum Impact Testing Machine For Glass
BS EN 12600 Pendulum Impact Testing Machine For Glass
Reference Standard:
BS EN 12600:2002 Glass in building – Pendulum test – Impact test method and classification for flat glass
Technical Data:
1) Pneumatic Tyres Impactor:
Weight: 50 kg ± 0.1 kg
Tyre pressure: 0.35Mpa ± 0.02Mpa
Tyre type: 3.50-R8 4PR
Sample size: 876 mm ± 2 mm * 1938 mm ± 2 mm
Inside the sample frame: 847 mm ± 5 mm * 1910 mm ± 5 mm
Impact frame footprint: 1300 mm*3900 mm*3700 mm
Lifting mode: manual, automatic optional
Impact body release mode: manual, automatic optional
2) Impact Testing Frame:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50
Manual type: Manual lifting , manual release, mechanical clamping
Main frame: internal width(847±5)mm internal height(1910±5)mm
Clamping frame: internal width(847±5)mm internal height(1910±5)mm
Rubber strip: (20±2)mm wide, (10±1)mm thick, hardness: (60±5) IRHD
Note: we will provide (20±2)mm wide, (10±1)mm thick, hardness: (60±5) Shore A
Dimension of test pieces: width(876±2)mm, height(1938±2)mm
Drop height: 190mm, 450mm, 1200mm
在线联系供应商
Other supplier products
 |
Clothing Mannequin Hardware Connector | Card Plate: Stainless Steel 201 Diameter: 85mm Thickness: 2mm Pin shaft: Stainless Steel 304 Diameter: 10mm Length: 120mm Surface: Industrial Surfa... |
 |
Test Device For The Impact Performance Of Shot Bag | Test Device For The Impact Performance Of Shot Bag Function: Determining the resistance of glazing material to impact by the penetration method. Pr... |
 |
Safety Glass Impact Test Device - Headform Impact Test Device | Safety Glass Impact Test Device - Headform Impact Test Device Related Standard: ISO 3537 Road vehicles –Safety glazing materials — Mech... |
 |
Tempered Glass Flatness Measure | Function: Measurement of arcuate form and wave form of tempered glass Related standard: 1) GB 15763.2 Safety glazing materials in building &ndas... |
 |
Automobile Engine Parts | Material: Stainless steel 304Size: 47mm*16mmThickness: 2mmWeight: 5gProcessing: Laser cutting Material: Stainless steel 304Size:88mm*19mmThickness... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
