Water injection counterweight dummy
Product Introduction
This counterweight dummy can be filled with water, the torso and the bottom are separated,
independently filled with water or solid filler, and can be adjusted to the Angle of the backrest to
fit the seat, child seat and other operating tests of the car.
Part series
1. Trunk
2. Base part
3. Bottom shaft fixing screw
4. Quality marking
5. Sensor applications
6. Install and fix the accessories
7. Accessories are installed and fixed
Mass distribution
1. Bottom: empty weight 10kg, loading: 38kg
2. Trunk: empty weight 4kg, load: 39kg
Renault special - German quality
The body part is designed with a seat belt fixed point;
Natural colors can be filled with water, sand, or other solid materials.
Product displays can be used in cars and playground facilities （with large filler ports）
And can be used in simulated weight and body type tests, including vehicle carrying, braking,
acceleration, tire traction, safety lacing, seat wear, and accident replay experiments.
Advantages
Light weight, easy to handle;
The maximum 17G acceleration has been tested;
Reusable;
Suitable for standard motor vehicle seats;
Designed with grooves for fastening seatbelts.
Product features
Water two scales can choose the weight;
Equipped with 2" filler port and plug head, and 1 "drain port, can be customized specific
drain/valve lifting ring port is available.
在线联系供应商
Other supplier products
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification: ... |
 |
Luggage travel bump tester | Product Introduction: This product is used for suitcases, bags, strollers with wheels… Through the test mileage and test speed, to check th... |
 |
Ejection kinetic energy tester | Product Introduction: Velocity measuring ejection kinetic energy tester, suitable for ejection projectiles, energy storage ejection toys, non-ener... |
 |
Universal Wear Tester | The Universal Wear Tester is used to test wear and abrasion resistance of fabrics for apparel, shoes, upholstery, automotive, and many other areas.... |
 |
Tube abrasion tester | Applicable standards: DB51/T 2450-2018: General technical specification for polyolefin composite wear-resistant pipes. This standard may put forwa... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
