Water injection counterweight dummy
Product Introduction
This counterweight dummy can be filled with water, the torso and the bottom are separated,
independently filled with water or solid filler, and can be adjusted to the Angle of the backrest to
fit the seat, child seat and other operating tests of the car.
Part series
1. Trunk
2. Base part
3. Bottom shaft fixing screw
4. Quality marking
5. Sensor applications
6. Install and fix the accessories
7. Accessories are installed and fixed
Mass distribution
1. Bottom: empty weight 10kg, loading: 38kg
2. Trunk: empty weight 4kg, load: 39kg
Renault special - German quality
The body part is designed with a seat belt fixed point;
Natural colors can be filled with water, sand, or other solid materials.
Product displays can be used in cars and playground facilities （with large filler ports）
And can be used in simulated weight and body type tests, including vehicle carrying, braking,
acceleration, tire traction, safety lacing, seat wear, and accident replay experiments.
Advantages
Light weight, easy to handle;
The maximum 17G acceleration has been tested;
Reusable;
Suitable for standard motor vehicle seats;
Designed with grooves for fastening seatbelts.
Product features
Water two scales can choose the weight;
Equipped with 2" filler port and plug head, and 1 "drain port, can be customized specific
drain/valve lifting ring port is available.
Send product request
Other supplier products
 |
Dry Penetration Tester | Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance through barrier materials of bacteria-carrying particles.... |
 |
Fabric Vertical combustion tester | fabric flame retardant performance test machine is mainly used to determine the textile flame, smoldering and carbonization tendencies. Suitable fo... |
 |
Automotive wire abrasion testing machine | Applicable standards: ISO 6722, OC/T730, JIS C 3046, JASO D 611.SAEJ1128-2005, JBT 8139 TBT 1484.1-2001 Part1.EN50305, EN50306 and other standards... |
 |
Convective Heat Resistance Tester | The instrument is used to determine the thermal resistance of protective clothing materials or samples and protective equipment by exposing the sam... |
 |
Automobile wire cutting tester | Product Introduction: Automobile wire cutting tester is the main instrument for testing the insulation strength of automobile wire, and it is the ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
