QM Contact Coolness Tester
The sensation of coldness or warmth when skin touches an object is referred to as the “coldness and warmth feeling.” The feeling of coldness or warmth will vary depending on the amount of heat transferred from the skin to the object. This device measures that feeling automatically by evaluating the “qmax” value (peak heat flux).
Test standard:
JIS L 1927Textiles-Measurement method of cool touch feeling property
GB/T 35263-2017Textiles-Testing and evaluation for cool sensation at contact instant
CNS15687. L3272Method of test for the instantaneous cool sensation fabrics
Features
- A design that mimics the sensation of actually touching an object
- The load and contact area of the heat plate that contacts the target sample are designed to simulate the feeling you experience when touching an object. This technology allows a maximum heat transfer rate that is closer to human sensation can be measured.
- Up to 10 consecutive automatic measurements
- Automatic measurements can be performed up to 10 consecutive times.
- The automation has also improved the accuracy of the measurement values.
- Space saving by build-in thermo cool
- Space saving is realized by built-in thermo cool that keeps the temperature of measuring sample constant.
- Easy operation with touch panel
- All measuring operation with touch panel. Measurement condition can be set up easily.
Specification
| Parameters | Data |
| Dimensions (W×D×H) *approx. | Measuring unit: 330×620×664 mm |
| Weight *approx. | Measuring unit: 42 kg |
| Power supply, Frequency | 100 to 240VAC, 50/60Hz |
| Interface | PC (optional)*1 |
| OS | Windows 7/8/8.1/10 |
| Sample size | 180×180 mm (standard) Thickness: 25 mm (or less) |
| *1PC is not included. We are able to prepare for PC with an appropriate specification. |
在线联系供应商
Other supplier products
 |
Oil-Water Separation Tester | Applicable Standards: (1)ISO/ TS 16332-2006 Diesel engine diesel filters Fuel Water Separation Efficiency Assessment Method. (2) ISO 4020-2001 Te... |
 |
Mask Breathing resistance testing machine EN149-2009 section 7.15 EN 13274-3 | Standards: EN149-2009 section 7.15. 8.3.4. EN 13274-3. GB 19083. GB 2626. NIOSH 42 CFR Part 84. JIS/T 8151 Mask Breathing resistance testing mach... |
 |
Large diameter blasting test machine | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable... |
 |
Pipes Hydrostatic Testing Machine/ Pipeline Pressure Resistance Tester / Pipe Burst Pressure Tester | Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of p... |
 |
MARK-II anti-slip testing machine | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
Same products
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
