Computer-controlled Helmet Impact Tester
Application Scope
This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the impact - resistance performance and penetration - resistance of helmets.
Specifications
1 System components: consists of a crash test stand and an analysis recorder.
2 Crash test bench: composed of fall guidance device, head type, head type fixed frame, ball joint, anvil, anvil seat, release guidance system and seat base and other components.
3 Impact height: control interface setting, with guidance system, acceleration detection and calibration device (1000 ~ 3000mm can be customized)
4 Base: the optimal solution is made of reinforced concrete, the instrument's steel base is connected to the concrete base, so that its quality is not less than 1600kg.
5 Test and Analysis Instrumentation System: consists of acceleration sensors or impact sensors, amplifiers, and data processing, display and recording, and other components. Part of the composition
Standard
GB 811 GB 24429
GB/T 38305-2019 GA 44
Dimensions (L*W*H*H cm): 90*80*450 (according to the order impact height)
Weight (kg): 350
Installation requirements:
1 Power supply: AC 220V 50Hz 500W
2 Environment: 10 ~ 35 ℃
3 Operation: floor, connected to the concrete pedestal
在线联系供应商
Other supplier products
 |
Lateral Rigidity Tester for Safety Helmets | Lateral Rigidity Tester for Safety Helmets - Material and Parts of Automotive - standard Standards: GB2812 Applications: It is used to te... |
 |
Vehicle Cabin Air Filter Tester | Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration... |
 |
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... |
 |
Paper whiteness tester | Product Introduction: Paper whiteness tester is suitable for the whiteness measurement of non-color surface flat objects or powders, and can accur... |
 |
Helmet UV pretreatment box | Product Information: Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national st... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
