Oxidizing liquid time pressure tester/
Product Description：
Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time/Pressure Test, 12.6.1 Test 2(c)(i): Time/Pressure Test, 23.4.1 Test C.1: Time/Pressure Test, and GB/T 21579-2008 Time/Pressure Test Method for Dangerous Goods.
Product characteristics：
1） Embedded processor, Windows CE operating system
2） 8-inch LCD touch screen can display the test status in real time
3） Automatic detection of pressure vessel air tightness （by detecting the initial pressure drop rate）
4） With ignition sound and light alarm function
5） Stainless steel seamless welded inner liner and pressure vessel, pressure sensor with corrosion resistance, high temperature resistance, high pressure resistance
6） Automatic timing and high-precision pressure detection system, real-time detection and display of pressure changes
7） With automatic pressure relief device, after the test, automatically punctured explosion-proof sheet, release pressure
8） Automatically draw the pressure curve
9） With reaction residue collection and anti-splash function to avoid external contamination of the sample
10） Remote ignition to ensure the safety of experimental personnel
11） The test process is fully automated without manual intervention, supporting parameter setting, data storage, viewing reports and other functions
Technical parameters:
|
Operating Environment |
(5 to 40)°C, <85%RH |
|
Pressure Transducer Response Capability |
Responds to pressure change from 0MPa-3MPa vessel cavity in 5ms |
|
Pressure Measurement Range |
(0 to 5)MPa |
|
Pressure Measurement Accuracy |
±0.1%FS |
|
Heating Method |
Electronic Ignition |
|
Burst Pressure of Rupture Disk |
2.5MPa ±5% |
|
Standard Timing Range |
(0 to 60)s |
|
Timing Display Resolution |
0.01ms |
在线联系供应商
Other supplier products
 |
Automatic open flash point tester | Product Introduction: The instrument can automatically test the flash point and ignition point of petroleum products （the ignition point of oil ex... |
 |
Protective Clothing Against Acid and Alkali Tester BS EN 463-1995 ISO 6529-2013 | Standards: GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against che... |
 |
Anti Synthetic blood penetration tester ISO 22609 YY 0469-2011 | Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothing ... |
 |
Wool Shrinkage Tester | Product Introduction: 1, YM116 type wool fold shrinkage tester is a precision instrument to determine the length of the towel under the standard t... |
 |
Cigarette paper smoldering performance tester | Cigarette paper smoldering performance tester - Other test instrument - standard Product Introduction: Cigarette paper smoldering performance tes... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
