Hydraulic oil purification and filtration tester
Meet the standard:
ISO 16889
ISO 4406
ASTM D7619
ISO 11500
Product Introduction:
Hydraulic oil purification and filtration testers are essential tools for characterizing the performance of fluid cleaning technologies.
A common type of tester, particularly for evaluating filter elements, utilizes the multi-pass test principle (standardized by ISO 16889).In this method, contaminated hydraulic oil is continuously circulated from a reservoir, passed through the filter element under test, and returned to the reservoir.As the test progresses, solid particles are continuously injected into the reservoir, and fluid samples are taken from both upstream and downstream of the filter. An automatic particle counter analyzes these samples to determine the number and size distribution of particles.
By comparing the upstream and downstream particle counts at different sizes, the filter's Beta ratio (a measure of efficiency) and dirt holding capacity (the amount of contaminant a filter can retain before reaching a specified differential pressure) are determined.
For evaluating purification systems (such as those for removing water or dissolved gases), testers may involve circulating oil through the purification unit and measuring the contaminant levels (water content via Karl Fischer titration or sensors, dissolved gases via gas chromatography or sensors) before and after the process.
These testers provide crucial data for selecting appropriate filtration and purification solutions, monitoring their performance, and ensuring that hydraulic fluids meet required cleanliness standards (e.g., as specified by ISO 4406 cleanliness codes).
The instrument is used for:
Evaluating the particle removal efficiency (Beta ratio) and dirt holding capacity of new and in-service hydraulic filter elements.
Comparing the performance of different filter technologies and manufacturers.
Assessing the effectiveness of oil purification systems (vacuum dehydrators, coalescers, absorbent filters) in removing water and dissolved gases.
Monitoring the cleanliness level of hydraulic fluid before and after filtration or purification.
Research and development of advanced filtration and purification media and systems.
Quality control for manufacturers and users of hydraulic filters and purification equipment.
Product Advantages:
Provides objective, quantitative data on filter performance (Beta ratio, dirt holding capacity).
Evaluates the effectiveness of purification methods in removing water and gases.
Essential for maintaining desired hydraulic fluid cleanliness levels.
Standard compliant test methods, particularly the widely recognized ISO 16889 for filter performance.
Helps predict the lifespan and effectiveness of filters and purification systems in real-world applications.
Crucial for ensuring the reliability and longevity of hydraulic components and systems by controlling contamination.
Facilitates informed decision-making in selecting appropriate fluid cleaning technologies.
Supports quality control and research and development efforts in fluid power and filtration industries.
在线联系供应商
Other supplier products
 |
Safety hat antistatic performance tester | Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB/T 2811-2019 "Safety ha... |
 |
Reciprocating Friction and Wear Testing Machine | Materials Science Research Research the friction and wear properties of various materials, including metals, non - metals, and composite materials... |
 |
Sample cutter 100cm | Sample cutter 100cm - Other test instrument - standard Standards: Applications: The application of sharp cutter wide. Even difficult mat... |
 |
Fully Automatic Continuous Flow Reaction Calorimeter/ Fully Automated Reaction Calorimeter / Continuous Flow Reaction Calorimeter | Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it can quickly obtain the reaction heat release a... |
 |
Rubbing fastness tester | Introduction Rubbing colour fastness tester STD-Jis is a standard testing machine, based on the friction tester type II (Gakushin type) specified ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
