Diesel Water Ash Sulfur Mixing Tester
Meet the standard:
ASTM D6304 ASTM D1744
ASTM D95 ASTM D482
ASTM D2622
ASTM D5453 ASTM D1266
Product Introduction:
Analysis of water, ash, and sulfur content in diesel fuel is critical for quality control, compliance with specifications, and predicting fuel performance and emissions. Standard test methods for these parameters often require a homogeneous sample to ensure the measured value is representative of the entire batch.
Free water can separate, and solid particulates (which contribute to ash and can contain sulfur) can settle.
While there isn't a single, universally recognized instrument explicitly named a "Diesel Water Ash Sulfur Mixing Tester," such a device would serve the function of vigorously and effectively mixing diesel samples under controlled conditions to disperse any settled water or solid contaminants.
This prepared, homogeneous sample can then be accurately sampled for analysis using instruments like Karl Fischer titrators (water), furnaces (ash), and XRF or combustion analyzers (sulfur). The specific mixing method might vary, including mechanical stirring, shaking, or homogenization, potentially with temperature control to ensure the sample is in the correct state for mixing and subsequent analysis.
The equipment is used in laboratories performing analysis of diesel fuel and other similar petroleum products, including:
Refineries and fuel terminals
Quality control laboratories
Research and development facilities
Independent testing laboratories
Product Advantages:
Ensures sample homogeneity, critical for obtaining accurate and repeatable results for water, ash, and sulfur analysis in diesel fuel.
Helps meet the sample preparation requirements specified in standard test methods.
Improves the reliability of analytical results by minimizing errors due to non-representative sampling.
Designed to handle diesel fuel samples safely in a laboratory environment.
Supports compliance with fuel quality standards and regulations.
Product Features:
Based on the likely requirements for mixing diesel samples for water, ash, and sulfur analysis:
Robust stirring or mixing mechanism suitable for diesel fuel viscosity (e.g., powerful magnetic stirrer with strong magnetic coupling, overhead stirrer with appropriate impeller, or a laboratory shaker).
Sample vessel holders or platforms capable of securing sample containers of various sizes (e.g., bottles, beakers).
Variable speed control for the mixing mechanism to adjust the mixing intensity based on sample volume and viscosity.
在线联系供应商
Other supplier products
 |
Digital Grinding Machine | Standard: GB/T 5211-16.GB/T 5211-19.GB/T 21867.1.GB/T 21868.5.ISO 787-16.ISO 787-17.ISO 8780-5.ISO 8780-1 I. Definition and Working Principle Di... |
 |
Carton drop tester | Hardened Concrete Bubble Spacing Coefficient Analyzer - Other test instrument - standard Standards: GB/T4857.5, 1S02248, etc. Applications... |
 |
Paper whiteness tester | Product Introduction: Paper whiteness tester is suitable for the whiteness measurement of non-color surface flat objects or powders, and can accur... |
 |
Steel wheel wear testing machine | Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes... |
 |
Seam Fatigue Tester | Standards: Toyota TSL5101G Section 3.7. GMW 3405. Nissan M-0154. Ford Motor Co. BN 106-02. TSL5100G Section 4.22 Applications: The Seam Fatigue ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
