Electric bicycle chassis dynamometer system
System overview:
The whole electric bicycle chassis power measurement system fully meets the national standard GB17761-2024 "Safety Technical Specifications for Electric Bicycles" Test requirements of clause 6.3.3.1 "Rated continuous output power of motor", clause 6.3.3.2 "Low-speed operation torque of motor", clause 6.3.3.3 "no-load back electromotive force of motor", clause 6.3.3.4 "Difference coefficient of inductance value of motor", Applied to electric bicycle manufacturers and quality inspection institutes for electric vehicle factory type test and quality sampling inspection. It can also be used for the analysis of electric vehicle development data. The test items include all the indicators of the whole electric bicycle and the electric motor: front wheel braking force, rear wheel braking force, braking performance, starting performance, speed performance, maximum speed, climbing performance, undervoltage test, overcurrent test, driving range, 100 li power consumption, battery capacity, coasting distance, rated continuous output power, low-speed running torque, no-load back electromotive force inductance value difference coefficient. User-friendly design and easy operation.
Technical parameters:
Loading torque: (0 —— 100) N.m, accuracy: 0.5.
1 The test system is composed of: main control cabinet, precision DC power supply, test platform, fixture actuator, etc.
2 Main control cabinet: The cabinet is beautiful in shape, easy to operate, suitable for people of different heights. A piece is installed on the cabinet for measuring and testing DC power voltmeter and AC voltmeter. The lily leaves on both sides of the cabinet are used for ventilation and heat dissipation of the strong power cabinet. There are two 60mm opening holes at the bottom of the cabinet for wiring, which are convenient for wiring. Two vertical partitions are installed in the middle of the cabinet for electrical installation.
3 Test system platform customized reference.
在线联系供应商
Other supplier products
 |
Cylindricity Tester | Performance Overview: The cylindrical instrument can measure the roundness, cylindricity, straightness, concentricity, coaxiality, flatness, paral... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
 |
Whole shoe breathability and heat preservation testing machine/ Footwear Breathability and Insulation Tester / Shoe Air Permeability Tester | Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athlet... |
 |
Fabric Bursting Strength Tester | Standards: ASTM 3786-06、ISO 2758、ISO 13938-2、BS 3424 BS 3137、BS 4768、AS 2001.2.4、GB/T 7742 IWSTM 29、EDA NA 80.4-02、EDA NA 80.3-99、BS 2922 FZ/T 6... |
 |
Sliding Bearing PV Tester | Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test method, JB/T 7381-2010 powder metallurgy oil bearing PV v... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
