Differential Scanning Calorimetry Tester
Scope of application:
It is used to analyze the thermal effect and corresponding temperature when the physical or chemical properties of organic and inorganic materials change under the program temperature control.
It can test and analyze the melting point and enthalpy change of the sample, and can also be used to determine the time of automatic catalytic oxidation of the sample under the condition of normal temperature oxygen to evaluate the thermal stability of the sample, suitable for plastics and rubber materials.
Meet the standard:
GB/T17391-1998,SO/TR 10837,1S011357-6,ASMT D3895,GB/T,1S011357-3, etc
Instrument features:
The instrument has stable performance, high precision and good repeatability!
Designed for measuring oxidation induction period in plastics and rubber industry:
Integrated design, temperature control and furnace device into one, reduce signal loss and interference, beautiful and exquisite appearance;
The furnace body adopts the upper cover structure, no need to lift the furnace body, convenient loading sample:
Equipped with standard material, users can carry out their own calibration of each temperature segment, reduce the error of the instrument;
High resolution data acquisition system, real-time data acquisition;
Intelligent adaptive monolithic microprocessor temperature control system, temperature control speed, high precision;
Perfect two-way atmosphere control system, using the original imported flow valve from the United States, can realize the automatic switching of ammonia to hydrogen in the measurement process:
Powerful management software to calculate oxidation induction period, epitaxial starting temperature, glass transition temperature, enthalpy variables. Enthalpy change ratio and other parameters;
Simple operation method, to achieve one-click testing, test results can be saved and printed:
Computer real-time display instrument status, test data and curves, easy to view.
Technical parameters:
DSC ranges ±10,+20,+40,+100,+160,+200mW can be automatically switched
Temperature range RT——500°C
Temperature accuracy +0.1' ° C
Heating rate 1——30°Cin
Gas supply system nitrogen, oxygen automatic switching （user）
Gas flow rate ≤200mlmin
Gas pressure 0.2MPa
Crucible material aluminum
Power supply AC 220V 50Hz
Overall dimensions 400x350x280mm
Weight 10kg
在线联系供应商
Other supplier products
 |
Metal ring friction and wear testing machine | Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa... |
 |
Face Mask Tensile Tester | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
Digital Fabric Thickness Gauge | Standards: Standards ASTM D1777 Standard test method for thickness of textile materials GB/T 3820 Determination of thickness of textiles and tex... |
 |
Oil-Water Separation Tester | Applicable Standards: (1)ISO/ TS 16332-2006 Diesel engine diesel filters Fuel Water Separation Efficiency Assessment Method. (2) ISO 4020-2001 ... |
 |
Mask Filter Efficiency Tester | Standards: EN 143 Protection device, particle filter requirement, test, mark EN 149 Respiratory protection device, microparticle filter with hal... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
