Wet penetration tester EN ISO 22610 EN 14126
Wet penetration tester Application:
Protective Clothing Tester Wet Microorganism Bacterial Penetration Resistance Tester Apparatus: used to measure the penetration performance of bacteria in the liquid when the material is subjected to mechanical friction (the shielding performance of the liquid against bacterial penetration by the mechanical friction chamber)
Wet penetration tester Standards:
EN ISO 22610. EN 14126. Annex A, YY/T 0506.6
Wet penetration tester Feature:
Automatic stop as preset counters.
High stable testing performance from precise structure design.
Stainless steel body provides high corrosion resistant performance.
Adjustable loading pressure.
Wet penetration tester Specifications:
Rotary speed: (60 ± 1)rpm
The test refers to the pressure on the material: (3±0.02)N
Outward wheel speed: 5~6 rpm
Timer set range: 0~99.99min
The inner and outer ring weights: (800±1)g
Wet penetration tester Principle:
Place the specimen on AGAR plate. A piece of the same specification is placed on the specimen. Cover with a high density polyethylene film about 10 microns thick. The three layers of material using the cone steel ring (the test material below, the mushroom center, high density polyethylene film on top) are stuck together. Place the ring on the AGAR plate on the turntable. The experiment means that the material can be applied to the material in a way that can be moved on the surface of the whole plate, so that the material is subjected to the combination of pressure and friction.
This model can simulate the force condition of the barrier material in the actual application and the microorganism penetration under the wet conditions.
The microbes on the microbial migrate to the surface of the AGAR plate after penetrating the experimental material. Through the culture and colony count of AGAR plate, the penetration performance of the test material can be quantitatively evaluated.
Wet penetration tester Parameters:
| Item | Detail |
| Rotary speed | 60rpm |
| Pressure from finger | 3N±0.02N |
| Excentric speed | 5-6rpm |
| Time | 0-99.99min |
| Loading weight | 800g |
| Power supply | 220V 50Hz |
| Dimension | 550mm×300mm×450mm 21.65inch×11.81inch×17.72inch |
| Net weight | 27kg 59.52lb |
在线联系供应商
Other supplier products
 |
textile spray rating tester ISO 4920 BS EN 24920 | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M+S P23. NEXT 23 Applications: Fabric surface waterproof performance tester to d... |
 |
Battery Slurry Resistance Tester | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ... |
 |
American European bending tester | Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose cho... |
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic... |
 |
Textile Air Permeability Tester | Meet the standard: ASTM D737 ISO 9237 EDANA WSP 070.1 JIS L1096 Product Introduction: Air permeability is defined as the volume of air that... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
