.

Wire Torsion Tester

Applicable standards:

GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method"

GB/T 239.2-2012 "Metal materials wire Part II Bidirectional torsion test method"

ISO 7800:2003 "Test method for unidirectional torsion of metal wires"

ISO 9649:1990 Test method for bidirectional torsion of metal wires

Product Advantages:

Evaluates Torsional Ductility: Directly measures the wire's ability to withstand twisting before fracture.

Standardized Testing: Enables testing according to widely recognized national and international standards.

Reveals Defects: Torsional stress can highlight material imperfections or inconsistencies not apparent under other tests.

Supports Quality Control: Provides a reliable method for ensuring consistent wire quality.

Versatile: Can perform both unidirectional and bidirectional torsion tests.

Controlled Parameters: Allows for precise control of twisting speed and specimen length for repeatable results.

Test principle:

Unidirectional torsion: The sample rotates 360 degrees evenly around its axis in one direction as a single torsion to the specified number of times or the sample breaks.

Two-way torsion: the sample rotates 360 degrees evenly around its axis in one direction as a torsion to the specified number of times, and then rotates the same number of times in the opposite direction or the sample breaks.

Main parameters:

1, clamping metal wire diameter range: 3.0≤d(D)<5.0

2, the space between the two fixtures: 500mm

3. Clamp range: 3.0-5.0mm

4, twisting speed: 30, 60r/min

5. Power supply: AC220V 50Hz

6, Noise: <70 dB(A)


在线联系供应商

至: 标准集团
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
HIGH SPEED LOCKSTITCH BAR TACKING MACHINE Applications High Speed Lockstitch Bar Tacking Machine is applicable to for various types fabric and thickness, suitable for light and medium weig...
Foam Indentation Fatigue Testing Machine
Foam Indentation Fatigue Testing Machine Purpose: This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested accordin...
KES - FB3 - A Compression Tester
KES - FB3 - A Compression Tester Content TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a...
Electric bicycle chassis dynamometer system
Electric bicycle chassis dynamometer system System overview: The whole electric bicycle chassis power measurement system fully meets the national standard GB17761-2024 "Safety Technical Spec...
Automatic open flash point tester
Automatic open flash point tester Product Introduction: The instrument can automatically test the flash point and ignition point of petroleum products (the ignition point of oil ex...
供应产品

Same products

PH-2398  pH/EC/ORP/温度 多参数测试仪
PH-2398 pH/EC/ORP/温度 多参数测试仪 卖方: 科立龙电子股份有限公司 大显示,可同时进行水质PH、氧化还原电位、电导率、温度的测量; 带背光LCD显示清晰,功能齐全,精度高; 仪表采用微电脑测量与控制技术,具有自动校准功能,方便实用。 内置蓝牙,可以与电脑或...
ORP-2026S  防水型 土壤ORP&温度 二合一测试仪
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 卖方: 科立龙电子股份有限公司 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV...
防水型 EC /TDS/温度三合一参数测试仪
防水型 EC /TDS/温度三合一参数测试仪 卖方: 科立龙电子股份有限公司 范围 EC ~19.9mS TDS Temp 0~50℃ 分辨率 ...
EC-98330 电导率营养测试棒
EC-98330 电导率营养测试棒 卖方: 科立龙电子股份有限公司 本营养测试仪适用于水培和农业应用,能够准确测量水中的营养液电导率(EC)单位为mS/cm,以及总溶解固体(TDS)转换为百万分之一(ppm)。 适合需要较高EC值的植物,该测试仪具有高达6.0...
PH-808防水笔式土壤PH计
PH-808防水笔式土壤PH计 卖方: 科立龙电子股份有限公司 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭,有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保...