Safety Helmets Impact and Penetration Resistance Tester/ safety helmet impact test equipment / Helmet impact and penetration tester
Standard
- GB/T 2811-2019(China’s national standard for helmet safety and impact resistance)
- GB/T 2812-2006/XXXX(Testing methods for impact absorption and penetration resistance of helmets)
- ISO 6220-2(Road vehicles – Restraint systems for occupants – Test methods for energy absorption)
- EN 960(Headforms for protective helmet testing)
Product Advantages
Dual-Function Versatility
- Rapid fixture exchange: Switch between impact and penetration tests in under 10 minutes.
- Universal compatibility: Tests industrial, cycling, motorcycle, and climbing helmets.
- Ultra-Precision Impact Analysis
- 5.0kg stainless steel hammer: Hemispherical head (R50±1mm) with 1.000mm drop height.
- 20.000N force sensor: 5kHz sampling rate captures transient forces (0.1N resolution).
Penetration Resistance Validation
- 3.0kg penetration hammer: 60°±0.5° conical tip (40mm min. length, 45–50 HRC).
- 1.000mm drop height: Simulates sharp object impacts at 18.7 km/h.
Smart Data Acquisition
- Real-time force curves: Plots acceleration-time histories (1ms time resolution).
- Pass/Fail alerts: Automated compliance checks per GB/T 2812-XXXX.
- Industrial Durability
- 4-meter steel frame: Anti-vibration design with powder-coated finish.
- IP65 control panel: Withstands dust and splashes in lab environments.
Product Features
Impact Testing
Drop Mechanism:
Electromagnetic release: Ensures repeatable 1.000±5mm drop height.
Guide rails: Self-lubricating linear bearings for friction-free motion.
Force Sensor:
Piezoelectric transducer: 20.000N capacity, 0.1% FS accuracy.
Data logging: 100.000-point memory with FFT analysis.
Penetration Testing
Hammer Assembly:
Quick-connect tip: Tool-free replacement for 60°/90° cone angles.
Hardness verification: Built-in Rockwell scale checker.
Safety System:
Light curtain: Halts tests if objects enter the drop zone.
Energy-absorbing base: Dissipates 99% of impact energy.
Universal Compatibility
Headform Options:
EN 960 headforms: Sizes S (54cm), M (58cm), L (62cm) with skin-like coating.
Custom headforms: 3D-printed for specialized helmet designs.
Technical Parameters
| Specification | Impact Test | Penetration Test |
|---|---|---|
| Drop Height | 1,000±5mm | 1,000±5mm |
| Hammer Weight | 5.0±0.1kg | 3.0±0.05kg |
| Tip Geometry | Hemisphere (R50±1mm) | Cone (60°±0.5°, 40mm min.) |
| Force Sensor | 20,000N, 5kHz sampling | N/A (mechanical stop) |
| Data Resolution | 0.1N | 0.1mm displacement |
| Frame Height | 4,000mm | 4,000mm |
| Power Requirements | 220V/110V AC, 50/60Hz, 800W |
Accessories Included
Headform Kit– EN 960 S/M/L sizes with polyurethane skin coating.
Hammer Set– Impact (5.0kg) and penetration (3.0kg) hammers with storage case.
Calibration Tools– NIST-traceable force gauge and Rockwell hardness tester.
Safety Kit– Light curtain, energy-absorbing base mat, and emergency stop button.
Software License– Lifetime access toHelmetImpact Pro(cloud-connected with API for integration with QMS systems).
Installation & Training– On-site setup by certified engineers + 16hrs virtual training for operators.
在线联系供应商
Other supplier products
 |
Shoe heat insulation testing machine -- sand bath | Shoe heat insulation testing machine -- sand bath - Other test instrument - standard Product Information: Main uses: Evaluate the insulation per... |
 |
Extremely High - Temperature Pre - treatment Chamber for Safety Helmets | Extremely High - Temperature Pre - treatment Chamber for Safety Helmets - Other test instrument - standard Standards: GB/T2812-2019 Applic... |
 |
AATCC Accelerotor ATCC 93 M&S P26 | Standards: ATCC 93.M&S P26.M&S P53.NEXT 31 Applications: AATCC Accelerotor, to rapidly determine abrasion resistance of flexible materia... |
 |
Femoral Condyles Components Fatigue Performance Tester | Standard ASTM WK51649: Specifies fatigue testing protocols for metallic femoral components in total knee arthroplasty, including F-N curve gener... |
 |
Carbon Black Content Tester/ Rubber Carbon Black Tester / Carbon Black Concentration Tester | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and as... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
