Bearing Friction Torque Measuring Instrument
Bearing friction torque is an important factor affecting bearing noise, vibration, and lifespan, and is a key indicator for measuring the dynamic performance of bearings.
Application
The bearing friction torque tester is a precision instrument specifically designed for measuring the friction torque of bearings. Its main purposes include, but are not limited to, the following aspects:
Bearing Quality Assessment
By measuring the friction torque of bearings, the quality level of bearings can be evaluated, including their manufacturing precision, material properties, and lubrication effects, etc.
Bearing Optimization Design
Friction torque data is an important basis for bearing optimization design. By testing the friction torque of bearings with different design schemes, their performance can be compared, and thus the best design scheme can be selected.
Standards
GB/T 32562-2016:Rolling bearings - Measuring methods for friction torque
JJF1137-2024:Calibration Specification for Bearing Friction Torque Measuring Instruments
Feature
High-Precision Testing: Utilizes electromagnetic analytical balance technology to achieve high-precision measurement of miniature bearing friction torque.
Multiple Measurement Modes: Supports various measurement modes including real-time, peak, first peak, and average.
Intelligent Monitoring: Features intelligent quality monitoring and rapid calibration functions, allowing for measurement results to be processed on a PC without disassembling the sensor.
Data Storage and Reporting: Automatically stores test data and generates test reports, facilitating user analysis and record-keeping.
Parameters
| Items | Details |
|---|---|
| Test Purpose | Measure the starting friction torque of miniature bearings |
| Test Procedure | Rotate the bearing at 2rpm and measure the maximum, minimum, and average friction torque during 2 weeks of rotation. Draw torque - time curve, torque - rotation angle curve, and rotational speed - time curve |
| Automatic Functions | Automatically analyze and store data, and generate test reports |
| Data Management Functions | Query, playback, and delete test data |
| Torque Measurement Range | 0 ~ 100μN - m |
| Torque Measurement Error | 1μN - m |
| Speed Setting Range | 0 ~ 4rpm |
| Accuracy of Rotational Speed Measurement | 0.5 |
| Working Environment | Inside the ultra - clean room |
| Power Supply | 220V ± 10%, 50Hz ～ 60Hz |
| Working Temperature | 5℃ ~ 35℃ |
| Working Relative Humidity | 5% ~ 85% |
Accessoriess
Torque sensor
Spindle assembly
Bearing clamping mechanism
Drive mechanism, etc.
Test Procedures
Bearing Installation: Install the bearing to be tested on the test equipment, ensuring that the installation is secure and the concentricity error does not exceed ±0.05 mm.
Preloading: Apply the specified axial and radial preload according to the type of bearing and its application.
Starting the Bearing: Start the bearing at the specified speed. After the rotational speed stabilizes (generally no less than 5 minutes), begin the measurement.
Recording Friction Torque Values: During the measurement process, record the friction torque value every 1 minute for 10 consecutive times, and take the average value as the measured friction torque value under this operating condition.
在线联系供应商
Other supplier products
 |
Automatic voltage internal resistance tester | The Automatic Voltage & Internal Resistance Tester is a precision electrical testing instrument designed for rapid and accurate measurement of ... |
 |
Catheter bending resistance tester | The Catheter Bending Resistance Tester is a specialized instrument designed to evaluate the bending performance and flow characteristics of cathete... |
 |
Transmission belt flammability and flame diffusion characteristics tester | Product Introduction The conveyor belt flammability and flame diffusion tester is suitable for testing the flammability and flame propagation char... |
 |
Gas Oxidizing Property Tester | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylinder Valve Exhaust Ports by Determination of Combusti... |
 |
Protective Clothing Flame Spread Test Machine | The tester is used for flame spread test of protective clothing. It is designed and manufactured according to ISO 15025 Standard for Protective Clo... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
