Dental Implants Static Torsion Testing Machine
Standard
ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data reporting requirements.
ASTM F2077-17: Complementary compliance for mechanical performance evaluation of dental prosthetic components.
Product Advantages
Compact Ergonomics: Lightweight (35 kg) design with integrated touchscreen control panel for benchtop use.
Ultra-Precision Torque Control: 0.001 Nm resolution ensures compliance with ISO 13498's 0.01 Nm/s loading rate requirements.
Smart Fixturing System: Quick-change collets accommodate implant diameters (3.0–6.5 mm) and lengths (8–18 mm).
Automated SOP Protocols: Pre-loaded ISO 13498 test sequences with real-time torque-angle curve generation.
Biorelevant Simulation: 37±1°C environmental chamber with saline mist system for in vitro corrosion testing.
Global Compliance: CE-marked and FDA-ready documentation package for regulatory submissions.
Product Features
Servo-Electric Actuator: 50 Nm peak torque capacity with programmable rotation angles (0°–360°).
Dynamic Angle Measurement: 0.001° resolution encoder tracks micro-rotational movements.
Axial Force Simulation: Integrated 5 kN load cell for combined torsion/compression testing.
Thermal-Mechanical Chamber: 10L capacity with rapid temperature control (20°C–50°C).
High-Resolution Imaging: Built-in 2MP camera system for screw thread damage analysis.
Safety Suite: Emergency stop, overload clutches, and torque limiting protection.
Dental Implant Fixture Kit:
Self-centering collets (3.0–6.5 mm implant compatibility)
Thread engagement gauges (ISO 13498 compliant)
Thermal-Mechanical Chamber:
10L capacity with rapid heating (10°C/min)
Corrosion-resistant titanium interior
TorsionMaster Pro Software:
Automated torque-angle curve generation and failure analysis
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
Operator Kit:
Calibrated torque wrench set (0.1–10 Nm)
Implant alignment jigs (ASTM F2077 compliant)
Calibration Bundle:
NIST-traceable torque calibration weights
Angular encoder verification tool
Safety Kit:
Torque limiting clutches
Acoustic enclosure with 25 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Torque | ±50 Nm (0.001 Nm resolution) |
| Rotation Range | 0°–360° (0.001° resolution) |
| Torque Application Rate | 0.01–0.10 Nm/s (ISO 13498 compliant) |
| Axial Force Capacity | ±5.000 N (5 N resolution) |
| Temperature Control | 20°C–50°C (PT1000 sensors) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 800W |
| Dimensions (W×D×H) | 450 × 400 × 600 mm |
| Weight | 35 kg (net) / 45 kg (with chamber) |
| Noise Level | <50 dB (A-weighted) |
在线联系供应商
Other supplier products
 |
Particle Abrasion Test machine | Industrial Activated Alumina HG/T3927-2007 and other test methods. It is a new generation of products launched after the Q-3 particle wear tester,... |
 |
Medical Face Mask Synthetic Blood Penetration Tester | Applicable Standards: GB 19083-2010 YY/T 0691-2008 YY 0469-2011 ISO 22609 ASTM F1862-07 Features: 1. Mask fixture is metal human head mold, ... |
 |
Direcct flame impingement Tester with BS 476-12，Surface spread of flame test | Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu... |
 |
Oxidizing Property Analyzer | Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 34.4.1 Test O.1: Test for ox... |
 |
Bone Plates Four-point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
