Dental Implants Static Torsion Testing Machine
Standard
ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data reporting requirements.
ASTM F2077-17: Complementary compliance for mechanical performance evaluation of dental prosthetic components.
Product Advantages
Compact Ergonomics: Lightweight (35 kg) design with integrated touchscreen control panel for benchtop use.
Ultra-Precision Torque Control: 0.001 Nm resolution ensures compliance with ISO 13498's 0.01 Nm/s loading rate requirements.
Smart Fixturing System: Quick-change collets accommodate implant diameters (3.0–6.5 mm) and lengths (8–18 mm).
Automated SOP Protocols: Pre-loaded ISO 13498 test sequences with real-time torque-angle curve generation.
Biorelevant Simulation: 37±1°C environmental chamber with saline mist system for in vitro corrosion testing.
Global Compliance: CE-marked and FDA-ready documentation package for regulatory submissions.
Product Features
Servo-Electric Actuator: 50 Nm peak torque capacity with programmable rotation angles (0°–360°).
Dynamic Angle Measurement: 0.001° resolution encoder tracks micro-rotational movements.
Axial Force Simulation: Integrated 5 kN load cell for combined torsion/compression testing.
Thermal-Mechanical Chamber: 10L capacity with rapid temperature control (20°C–50°C).
High-Resolution Imaging: Built-in 2MP camera system for screw thread damage analysis.
Safety Suite: Emergency stop, overload clutches, and torque limiting protection.
Dental Implant Fixture Kit:
Self-centering collets (3.0–6.5 mm implant compatibility)
Thread engagement gauges (ISO 13498 compliant)
Thermal-Mechanical Chamber:
10L capacity with rapid heating (10°C/min)
Corrosion-resistant titanium interior
TorsionMaster Pro Software:
Automated torque-angle curve generation and failure analysis
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
Operator Kit:
Calibrated torque wrench set (0.1–10 Nm)
Implant alignment jigs (ASTM F2077 compliant)
Calibration Bundle:
NIST-traceable torque calibration weights
Angular encoder verification tool
Safety Kit:
Torque limiting clutches
Acoustic enclosure with 25 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Torque | ±50 Nm (0.001 Nm resolution) |
| Rotation Range | 0°–360° (0.001° resolution) |
| Torque Application Rate | 0.01–0.10 Nm/s (ISO 13498 compliant) |
| Axial Force Capacity | ±5.000 N (5 N resolution) |
| Temperature Control | 20°C–50°C (PT1000 sensors) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 800W |
| Dimensions (W×D×H) | 450 × 400 × 600 mm |
| Weight | 35 kg (net) / 45 kg (with chamber) |
| Noise Level | <50 dB (A-weighted) |
Send product request
Other supplier products
 |
UL94 Horizontal/ Vertical Flame Test Machine | This machine is designed according to plastic Materials flammability test; It is used to test flammability, burning rate, flame spread, burning f... |
 |
Bending Tester STD- FB2 - A | The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artisans and professionals when judging a fabric's texture. T... |
 |
Bundle wire and cable burning test machine | Standards According to IEC60332-3-10:2000.and GA306.1-2007 Main components Testing chamber, electric control system, air source, ignition sour... |
 |
Syringe Sealing Negative Pressure Tester | The Syringe Sealing Negative Pressure Tester is a precision instrument designed to evaluate the integrity of syringe barrels under negative pressur... |
 |
Reciprocating Friction and Wear Evaluation Apparatus | Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
