Vehicle Cabin Air Filter Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters used in automobiles. It measures particulate matter filtration efficiency, pressure drop, and dust holding capacity, providing accurate and repeatable data essential for product development, quality control, and regulatory compliance. The tester combines advanced aerosol generation, dust dispersion, and particle counting systems to simulate real-world operating conditions and capture reliable performance indicators.
Application
This tester is widely used in automotive R&D centers, filter manufacturing facilities, quality control laboratories, and third-party testing institutions. It is suitable for testing cabin air filters of passenger vehicles, commercial vehicles, buses, and specialized transport equipment. The instrument evaluates filter performance under controlled airflow, particle loading, and environmental conditions, providing insights into efficiency, airflow resistance, and dust holding capacity. It supports product validation, development of high-efficiency filters, compliance verification with international standards, and routine quality assurance in production lines.
Standards
The Vehicle Cabin Air Filter Tester is designed in accordance with the following standards:
(1) DIN 71460-1: Road vehicles – Air filters for passenger compartments of motor vehicles – Part 1: particulate matter filtration tests
(2) ISO/TS 11155-1: Road vehicles – Air filters for occupants’ compartments – Part 1: particulate filtration test
(3) GB/T 14295-2019: Automotive air filter performance testing
(4) GB/T 13554-2020: Road vehicle air filter testing methodology
Product Features
(1) Generates and controls airflow rates from 70 to 700 m³/h to simulate real operating conditions.
(2) Accurately measures pressure drop across the filter from 0 to 1000 Pa.
(3) Provides a filter adapter to securely mount filters up to 300 × 600 mm in size.
(4) Standardized test section of 180 cm² ensures consistent airflow distribution.
(5) Integrated environmental sensors continuously monitor temperature, relative humidity, and atmospheric pressure.
(6) Dust disperser (SAG 410/L) delivers controlled dust load from 2 to 245 g/h.
(7) Aerosol generator (ATM 220) produces test aerosols for precise performance evaluation.
(8) Electrostatic neutralizer (EAN 581) removes charges from aerosols to ensure measurement accuracy.
(9) High-precision particle counter (TOPAS spectrometer LAP321) measures particle size and concentration.
(10) Automated control and data acquisition system supports test sequences, real-time monitoring, and reporting.
Technical Parameters
| Parameter | Specification |
|---|---|
| Air Flow Rate | 70–700 m³/h |
| Pressure Difference | 0–1000 Pa |
| Filter Adapter Size | 300 × 600 mm |
| Test Section Cross-Section | 180 cm² |
| Environmental Sensors | Temperature, Relative Humidity, Atmospheric Pressure |
| Dust Disperser | SAG 410/L (2–245 g/h) |
| Aerosol Generator | ATM 220 |
| Electrostatic Neutralizer | EAN 581 |
| Particle Measurement | Laser aerosols, TOPAS spectrometer LAP321 |
| Power Supply | 400 V AC, 16 A |
| Test Bench Dimensions | 460 × 120 × 340 cm (L × W × H) |
Accessories
(1) Dust disperser SAG 410/L
(2) Aerosol generator ATM 220
(3) Electrostatic neutralizer EAN 581
(4) TOPAS spectrometer LAP321 particle counter
(5) Filter adapters of various sizes
(6) Environmental monitoring sensors
Operation and Maintenance
(1) Install the filter securely on the adapter and ensure proper sealing.
(2) Set airflow, dust load, and test duration according to test requirements.
(3) Start the test bench and monitor environmental conditions in real-time.
(4) After completion, record efficiency, pressure drop, and dust holding capacity results.
(5) Clean the dust disperser, aerosol generator, and filter housing regularly to maintain accuracy.
(6) Calibrate particle counters and sensors periodically to ensure compliance with international standards.
在线联系供应商
Other supplier products
 |
Suture Needle Elasticity and Toughness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Quality Control: In the production process of medical devices, it is used for... |
 |
In-situ expansion analysis system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measurin... |
 |
Goggles Puncture Resistance Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The safety goggle puncture resistance testing machine is a device used to test the puncture... |
 |
Photography Testing Light Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resol... |
 |
Artificial turf wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com An artificial turf wear tester is a device specifically designed to evaluate the wear resis... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
