Rubber Mooney Viscosity Tester
The Rubber Mooney Viscosity Tester measures the viscosity of rubber under controlled temperature and shear conditions. A rubber sample is loaded into the viscometer cavity and preheated, then the rotor applies shear torque to the sample. The sample produces a resistance moment that is displayed either via a dial indicator or a connected computer, giving the Mooney viscosity value. This test is essential for evaluating processing properties and consistency of rubber compounds.
Applications
(1) Natural rubber and synthetic rubber: evaluation of processing viscosity for tire and automotive parts manufacturing.
(2) Rubber compounds: quality control during mixing and formulation.
(3) Footwear midsoles and outsoles: monitoring rubber flow and processability.
(4) Industrial rubber products: hoses, gaskets, belts, vibration dampers.
(5) Laboratory research: R&D on new rubber formulations and additives.
(6) Production monitoring: ensuring consistency of unvulcanized rubber batches.
Standards
(1) GB/T 1232 — Unvulcanized rubber: Determination of Mooney viscosity
(2) GB/T 1233 — Rubber compound: Determination of initial vulcanization characteristics — Mooney viscometer method
(3) HG/T 3242-2017 — Rubber Mooney viscometer
(4) ISO 289 — Unvulcanized rubber: Determination by shear disc viscometer
(5) ISO 667 — Rubber compound: Determination of initial vulcanization characteristics — Mooney viscometer method
Features
(1) Measures key processing property: quantifies rubber viscosity under controlled shear and temperature.
(2) Standard compliant: designed to meet GB/T, HG/T, and ISO requirements for Mooney viscosity testing.
(3) High precision: rotor speed and torque measurement are accurately controlled.
(4) Suitable for quality control and R&D: evaluates unvulcanized rubber and compounds.
(5) Easy data acquisition: torque readings can be displayed on dial or computer.
Technical Parameters
| Item | Specification |
|---|---|
| Measurement & control temperature range | Room temperature – 200℃ |
| Torque measuring range | 0 – 100 Mooney units |
| Calibration accuracy | 100 ± 0.5 Mooney units |
| Rotor speed | 2 ± 0.02 RPM |
| Measurement points | 0 – 200 points |
| Ambient temperature | 0 – 35℃ |
| Relative humidity | <80% |
| Test pressure | 11.5 kN ± 0.5 kN |
| Air pressure | 0.45 – 0.6 MPa |
Accessories
(1) User manual
(2) Delivery note
(3) Standard Mooney viscometer sample molds
(4) Electronic scale for sample weighing
(5) Scissors for sample preparation
(6) Heat insulation gloves
Test Procedures
(1) Prepare two bubble-free rubber samples: diameter ~45 mm, thickness ~3 mm; one sample with a center hole ~8 mm. Total weight ~16 g.
(2) Load the samples into the Mooney viscometer cavity.
(3) Preheat the instrument to the target temperature.
(4) Start the rotor to apply shear torque to the sample.
(5) Monitor the torque resistance via dial or computer to obtain Mooney viscosity.
(6) Record the measurement for analysis.
(7) Repeat as necessary for multiple samples.
Maintenance
(1) Keep the instrument and molds clean; remove residual rubber after each test.
(2) Check and calibrate the rotor speed and torque measurement periodically.
(3) Inspect air pressure and connections to maintain stable operation.
(4) Verify temperature control accuracy with a certified thermometer.
(5) Ensure the environment is within the specified temperature and humidity ranges.
(6) Lubricate moving parts as recommended by the manufacturer.
在线联系供应商
Other supplier products
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Flooring VOC Emission Test Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
 |
Photovoltaic module insulation resistance tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta... |
 |
Aerosol Foams Flammability Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi... |
 |
Total Hip Joint Prostheses Wear Tester | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
