Rubber non-rotor vulcanization Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Rubber Non-Rotor Vulcanization Tester is a precision instrument designed for the rubber processing industry to monitor and control rubber material quality. It provides rapid inspection and supports rubber basic research and formulation optimization. The tester can accurately measure scorch time, positive vulcanization time, vulcanization index, and torque parameters (maximum and minimum), offering essential data for quality control, R&D, and formula development.
Applications
(1) Rubber compound quality control: Rapid assessment of rubber material properties during production.
(2) Rubber R&D: Testing new rubber formulations and additives.
(3) Vulcanization process optimization: Determining optimal curing conditions.
(4) Material comparison: Evaluating performance differences between batches or suppliers.
(5) Rubber laboratory testing: Suitable for research institutes and industrial laboratories for basic rubber studies.
Standards
(1) ASTM D5289-95 — Standard Test Method for Rubber Property—Vulcanization Using a Moving Die Rheometer
(2) ISO 6502-1999(E) — Rubber, Vulcanized or Thermoplastic—Determination of Cure Characteristics
(3) GB/T 16584-1996 — Rubber—Determination of Cure Characteristics Using a Non-Rotating Rotor Rheometer
Advantages
(1) Accurate vulcanization measurement: Determines scorch time, positive cure time, vulcanization index, and torque with high precision.
(2) Supports formula optimization: Provides reliable data for rubber compound development.
(3) Standard compliant: Meets ASTM, ISO, and GB/T international and national standards.
(4) User-friendly operation: Simple control interface for temperature and time settings.
(5) Stable and durable: Designed for long-term use in laboratory and production environments.
Technical Parameters
| Item | Specification |
|---|---|
| Temperature measurement range | 0–200℃ |
| Temperature setting range | 0–200℃ |
| Temperature display range | 0–200℃ |
| Set time range | 0–200 minutes |
| Torque measuring range | 0–5 N·m, 0–10 N·m, 0–20 N·m |
| Swing frequency | 100 times/min (≈1.7 Hz) |
| Power supply | AC 220V ±10%, 50 ±1Hz, must be grounded |
| Compressed air | 0.32 MPa, controlled by pneumatic valve |
| Ambient conditions | Temperature 0–40℃, RH <80%, no corrosive gases |
Accessories
(1) Main tester ×1
(2) Pneumatic control valve ×1
(3) Power cable ×1
(4) Instruction manual ×1
Test Procedure
(1) Connect the power supply and compressed air source.
(2) Set the desired test temperature and curing time on the control panel.
(3) Load the rubber sample into the non-rotor rheometer cavity.
(4) Start the test; the swing mechanism will apply torque to the sample.
(5) Monitor the displayed data: scorch time, positive cure time, vulcanization index, and maximum/minimum torque.
(6) Stop the test after the set time, remove the sample, and record the results.
Maintenance Information
(1) Keep the instrument clean; remove rubber residues after each test.
(2) Periodically inspect the swing mechanism and torque sensor for wear or damage.
(3) Check temperature calibration regularly to ensure accurate measurements.
(4) Maintain pneumatic components, ensuring air lines and valves are free of leaks.
(5) Store in a dry, non-corrosive environment when not in use.
在线联系供应商
Other supplier products
 |
Zipper Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The functional life of a zipper is often determined by its ability t... |
 |
Melting Materials Dripping Test Machine,NF P92-505、EU 95/28/EC、ECE R118 Annex 7 FTech-NFP92-505 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description： This tester meet international standards NF P92-505. EU 95/28 / EC, ECE techn... |
 |
ASTM & ISO Professional MCD Metal Scratch Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The MCD Metal Scratch Tester is designed to quantify scratch resistance on me... |
 |
Fabric Fiber Shedding Degree Tester (Friction) | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Fiber Shedding Degree Tester (Friction) is an instrument used to evaluate the li... |
 |
Laboratory Automotive Wash and Friction Testing Bench，Lab automotive wash and abrasion testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Laboratory Automotive Wash and Friction Testing Bench is designed to evaluate the scrat... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
