Medical Face Mask Differential Pressure Tester
The Medical Face Mask Differential Pressure Tester, also known as the Mask Breathability Tester, is designed to evaluate the breathability of medical face mask materials. The instrument measures the differential pressure (ΔP) required to draw air through a defined surface area at a constant airflow rate. By providing controlled suction through the sample, the tester accurately determines the air exchange pressure and comfort performance of mask materials, which is essential for medical mask quality assessment.
Application
The Medical Face Mask Differential Pressure Tester is applicable to breathability evaluation across the following industries and products:
(1) Medical and Healthcare Industry: surgical masks, medical face masks, N95/FFP masks, disposable masks — evaluation of breathability and air exchange resistance
(2) Protective Clothing Industry: mask-integrated protective garments, isolation gowns with mask functionality — assessment of airflow and wearer comfort
(3) Textile Industry: nonwoven fabrics, filter fabrics, coated fabrics — air permeability and differential pressure testing
(4) Research and Development: development of new mask materials, optimization of air permeability and comfort, comparative studies
(5) Quality Control: production batch verification, mask material compliance testing for breathability standards
(6) Third-Party Testing Laboratories: certification testing, laboratory evaluation of mask differential pressure and comfort properties
The instrument is widely used for product development, quality control, R&D, and laboratory testing.
Standards
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) YY 0469-2011 – Technical Requirements for Medical Surgical Masks
(2) YY/T 0969-2013 – Medical Face Masks — Air Permeability and Breathability Testing
(3) EN 14683:2014, Annex C – Medical Face Masks — Requirements and Test Methods (Differential Pressure)
(4) ASTM F2100 – Standard Specification for Performance of Materials Used in Medical Face Masks
Features
(1) Suction air source, not limited by the test site space
(2) High-precision differential pressure sensor with digital display of ΔP across the sample
(3) Special sample holder ensures firm positioning of the mask material
(4) Automatic measurement of air exchange pressure and evaluation of material comfort
(5) Compact and easy-to-operate design suitable for laboratory and production environments
Technical Parameters
| Item | Specification |
|---|---|
| Flow Meter Range | 0 – 10 L/min |
| Manometer Range & Accuracy | 0 – 1000 Pa, ±1 Pa |
| Internal Diameter of Sample Holders | Φ25 mm |
| Test Area | 4.9 cm² |
| Power Supply | 220 V, 50 Hz, 200 W |
| Weight | 65 kg |
Accessories
Main test unit with suction air source
Differential pressure sensor
Sample holders and clamps
Digital display controller
Power cable
Operation manual
Calibration certificate
Test Procedures
(1) Prepare the mask or material sample according to the standard
(2) Mount the sample firmly in the sample holder
(3) Set the airflow rate and power on the instrument
(4) Start the measurement to obtain differential pressure (ΔP)
(5) Record results and evaluate breathability and material comfort
(6) Repeat tests for multiple specimens or different material types
(7) Clean the sample holder and sensor after testing
Maintenance Information
(1) Clean sample holders and airflow channels regularly
(2) Verify calibration of the differential pressure sensor periodically
(3) Inspect suction system and airflow components for proper operation
(4) Keep the instrument in a clean, dry laboratory environment
(5) Maintain operation manual and calibration documentation for compliance purposes
在线联系供应商
Other supplier products
 |
Metallic Cables and Wire Ropes Mechanical Property Testing Machine | Standard YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue stren... |
 |
Athletic Footwear Shock Attenuating Tester | Standard SATRA TM142 ASTM F1614 ASTM F1976 Product Advantages 1. Uncompromising Precision Hemispherical Impactor: 45mm diameter (37.5mm radiu... |
 |
Xenon Test Chamber/weather ometer | Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal n... |
 |
Safety Helmet Lateral Rigidity Tester | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati... |
 |
Liquid Sustained Combustion Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
