Foam Repeated Compression Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression plate of the testing machine, at the rate of 60 times per minute, compress the specimen at the frequency of 60 times to compress the height of the specimen 50%, reciprocating compression up to 80.000 times, after 30 minutes at room temperature, measure its thickness to convert the compression deformation rate.
Applications
1. Applicable Foam Material Types
Polyethylene foam materials (corresponding standards: ISO 7214. JIS K6767)
Latex foam rubber cushioning materials (corresponding standard: JIS K6382)
Other flexible porous polymer foams (such as polyurethane soft foam, etc., adaptable to similar compression fatigue testing requirements)
2. Applicable Product Fields
Furniture industry: Foam cushions for sofas/chairs, backrest foam, mattress filling foam (testing for collapse and deformation after long-term use)
Automotive interior industry: Car seat cushioning foam, headrest foam, interior shock-absorbing foam (evaluating performance stability after repeated compression during driving)
Packaging industry: Foam materials for cushioning packaging (verifying protective capabilities after multiple compressions)
Daily necessities industry: Foam cushions, footrests, and other products (testing durability during daily use)
Standards
GB/T 40872-2021: Test Methods for Polyethylene Foams
ISO 7214:2007: Cellular plastics — Polyethylene — Test methods
JIS K6382: Test Method for Repeated Compression of Rubber Materials
GB/T 42258-2022: Determination of Fatigue Properties of Flexible Porous Polymer Materials by Constant Deformation Method
JIS K6767-1999: Test Methods for Polyethylene Foams and Cellular Rubber Materials
Features
1. Standardized Testing Functions and Procedures
The system simulates the repeated compression conditions of foam materials in actual use. The sample is compressed to 50% of its initial height at a frequency of 60 cycles/minute, allowing for up to 80.000 cycles of reciprocating compression.
After testing, the sample is left to rest at room temperature for 30 minutes before precisely measuring its thickness and calculating the compression deformation rate. The process conforms to professional testing standards and effectively evaluates the fatigue resistance of the foam. The system possesses precise sample thickness measurement capabilities, providing fundamental support for the accuracy of the test data.
2. Multi-Standard Compatibility
Compliant with international standard ISO 7214 (Test Methods for Polyethylene Foam Materials), Japanese Industrial Standard JIS K6767 (Polyethylene Foam Testing), and JIS K6382 (Latex Foam Rubber Cushioning Material Testing), it meets the compliance testing needs of different types of foam materials.
3. Flexible Technical Adaptability
The compression stroke covers 0-50mm, adaptable to foam samples of various thicknesses (such as common 20-50mm thick samples). Equipped with a stable operating system (such as a motor and LCD counter), it supports high-cycle (up to 80.000 cycles) continuous reciprocating compression. The testing process does not require long-term personnel supervision, and the system automatically stops after reaching the set number of cycles.
Technical Parameters
| Parameter | Specification |
|---|---|
| Meet the standard | ISO-7214. JIS-K6767. K6382 |
| Compression stroke | 0——50mm |
| Compression rate | 60 cpm (cycles per minute; noted: original shows "60cm", likely a typo) |
| Pressure plate spacing | 200mm |
| Test size | 200×200mm |
| Plate area | 30×30cm |
| Upper pressure plate | V-type exhaust trench distance: 19×19mm |
| Lower pressure disc | 289 air holes, hole distance: 19mm |
| Motor | 1/3HP |
| Counter | LCD, 0——999999 |
| Volume | 60×40×75cm |
| Weight | 102kg |
| Power Supply | 1 # AC 220V, 5A (noted: original shows "AC220. 5A", corrected for clarity) |
Accessoriess
200×200mm standard sample cutting template, spare upper and lower platen assemblies, dedicated power cord (compatible with AC220V 5A), equipment operation and maintenance manual, small maintenance tool kit (including hex wrenches, etc.), sample thickness calibration block.
Test Procedures
1. Equipment Pre-inspection and Preparation
Confirm power supply matches AC220V 5A and connect the power cord;
Check that the upper and lower compression plates are securely installed and that the air holes on the lower compression plate are not blocked;
Turn on the power and verify that the LCD counter and compression mechanism are functioning correctly.
2. Sample Preparation
Use a 200×200mm cutting template to cut the foam material into standard samples;
Measure and record the initial thickness of the sample.
3. Test Parameter Settings
Set the compression rate to 60 cpm (cycles/minute);
Set the target number of compression cycles using the LCD counter (within the range of 0-999999);
Adjust the distance between the compression plates to a position that matches the initial thickness of the sample (not exceeding the maximum distance of 200mm).
4. Sample Installation
Place the sample smoothly in the center of the lower compression plate;
Slowly lower the upper compression plate until it lightly touches the sample surface to complete positioning.
5. Starting and Running the Test
After confirming that the parameters and sample are correct, start the test program;
The equipment will compress the sample reciprocally at the set rate (compression stroke adapts to 50% of the initial thickness of the sample) until the set number of cycles is reached, then it will automatically stop.
6. Sample Handling and Data Recording
Raise the upper compression plate, remove the sample, and let it stand at room temperature for 30 minutes;
Measure the final thickness of the sample and calculate the compression deformation rate;
Record the number of test cycles, initial/final thickness of the sample, and other data.
7. Equipment Reset and Maintenance
Clean the surface of the compression plates and remove any sample residue;
Turn off the power, disconnect the power cord, and protect the equipment from dust.
在线联系供应商
Other supplier products
 |
Cabin air filter PM and VOC removal efficiency test system | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for both particle separation and gas absorption/desorption of of ... |
 |
Splash and spray liquid resistance testing system supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You use this tester to assess splash and spray liquid tightness of acid and al... |
 |
Femoral Stem Fatigue Testing Machine | ISO 7206 Hip Implant Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)YY/T 0809.4 (2)ISO 7206-4 These standards specify the test me... |
 |
Diaper Absorption Rate Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Diaper Absorption Rate Testing Machine is a specialized laboratory device used to evalu... |
 |
CE certified fabric pilling testing machine supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1. Scientific mechanical structure, smooth rotation, no mechanical ... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
