Thermal - Cold Cycle Testing Machine
The Thermal-Cold Cycle Testing Machine is a professional equipment used for high and low-temperature reliability testing. It is primarily used in fields such as electronics, electrical engineering, automotive, and aerospace, to test the performance of materials and components under extreme temperature conditions. It conforms to GB/T2423.1.2.3 standards and supports three test modes: high temperature, low temperature, and thermal shock. Rapid temperature switching can be achieved through a two-chamber or three-chamber structure.
Applications
1. Electronics and Electrical Engineering: Testing the temperature stability of chips, batteries, etc., to meet industry standards;
2. Automotive Industry: Verifying the temperature resistance of automotive electronics and body materials;
3. Materials Science: Screening the temperature tolerance of plastics and composite materials to support material selection;
4. Aerospace/Defense Industry: Adapting to extreme temperature change scenarios to ensure stable equipment operation;
5. Medical/Construction Materials: Verifying the temperature durability of medical equipment and building materials to meet compliance requirements.
Standards
BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber).
Adaptive Certification: Configurable to meet ISO, ASTM, and EN standards upon request.
Features
Dual Models for Diverse Needs:
1769 Series (Pressurized): Operates up to114°Cwith integrated pressure chamber for BS 7291 compliance.
1770 Series (Non-Pressurized): Cost-efficient solution for tests up to95°C.
Smart Sample Management:
Adjustable tension rig with load cell (0–500N) for real-time strain monitoring.
Perforated wall panels and custom fixtures for irregularly shaped specimens.
Safety & Efficiency:
Dual-access doors (single/double-hinged) for ergonomic loading.
Self-cleaning water circuit minimizes maintenance downtime.
Connected Workflow:
IoT-ready controller with 7-day auto-sequencing and cloud data backup.
Multi-language HMI (English, French, German, Chinese) with audit trail logging.
Technical Parameters
| Specification | 1769 Series (Pressurized) | 1770 Series (Non-Pressurized) |
|---|---|---|
| Temperature Range | -20°C to 114°C | -20°C to 95°C |
| Max. Test Pressure | 16 bar (232 psi) | N/A |
| Flow Rate | 25 m³/h (108 GPM) | 25 m³/h (108 GPM) |
| Max. Sample Ø | 160 mm | 160 mm |
| Power Supply | 380V/50Hz 3-phase (CE certified) | 220V/60Hz single-phase (UL listed) |
| Chamber Volume | 850L (expandable to 1.200L) | 600L |
| Dimensions (W×D×H) | 1.200mm × 800mm × 1.900mm | 900mm × 700mm × 1.700mm |
| Weight | 680 kg (net) | 520 kg (net) |
Accessoriess
1.Chamber Access:
Single-hinged door (standard) or dual-swing doors for walk-in loading.
2.Sample Fixation:
Adjustable racks for pipes/fittings (Ø16mm–Ø160mm).
Custom perforated walls for bundled specimens.
3.Tension Control:
Motorized tension rig with 0.1N resolution load cell.
4.Extended Warranty:
3-year comprehensive coverage for critical components.
5.Calibration Kit:
NIST-traceable temperature/pressure sensors with certificate.
Test Procedures
1. Pre-test Preparation
Check that the instrument's power supply and cooling/heating systems are functioning correctly, replenish the circulating medium, clean any impurities from the test chamber, and calibrate the temperature sensor.
2. Sample Preparation and Installation
Cut the sample according to testing requirements, record the sample's basic information, place the sample smoothly into the test chamber, avoiding stacking, and ensure the sample does not touch the chamber walls.
3. Parameter Settings
Select the test mode via the control panel, set the high and low temperature thresholds, constant temperature duration, number of cycles, and heating/cooling rate. Save the parameters after confirming their accuracy.
4. Starting the Test
Close the test chamber door, press the start button, and the instrument will automatically run according to the set parameters, monitoring the panel temperature and operating status in real time.
5. Test Monitoring
During operation, observe the instrument for any abnormalities, record changes in the sample's state during the temperature cycling process, and prevent sudden malfunctions from affecting the test.
6. Test Completion and Cleaning
After reaching the set number of cycles, the instrument will automatically shut down. After the chamber temperature returns to room temperature, open the chamber door, remove the sample and record the test results, clean the test chamber, turn off the instrument power, and organize the test data.
在线联系供应商
Other supplier products
 |
Molten Metal Penetration Resistance Test device | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
 |
Helmets Designated Protection Areas Tester | Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t... |
 |
Temperature Oxygen Index Apparatus, ISO4589-3, Nes 715 | Introduction: Temperature Oxygen IndexApparatus belongstoantiflamingtest equipment for measuring the combustion performance of the vertical bars o... |
 |
Diaper Anti-Side Leakage Performance Tester | The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side ... |
 |
Total Hip Joint Prostheses Wear Tester | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
