Luer conical joint multi-function tester
The Luer Conical Joint Multi-Function Tester is a precision instrument designed to evaluate multiple performance characteristics of Luer-type connections used in medical devices. It tests leakage, gas tightness, separation force, unscrewing torque, assembly ease, slip resistance, and stress cracking of syringes, needles, infusion sets, catheters, and anesthesia filters. The device ensures reliable performance, safety, and compliance of medical Luer connections for both locked and non-locked designs.
Application
This tester is suitable for a broad range of medical Luer connection testing scenarios, including:
(1) Syringes (1 mL – 60 mL) – verifying leakage, torque, and assembly performance.
(2) Injection needles – testing connection integrity and unscrewing torque.
(3) Infusion sets and blood transfusion sets – assessing slip resistance and stress cracking under load.
(4) Catheters – evaluating connection reliability and sealing performance.
(5) Anesthesia filters – ensuring secure connections and prevention of leaks.
(6) Research and development of new Luer-type connectors – optimizing design for clinical use.
(7) Production line quality control – guaranteeing consistent performance across batches.
Standards
The tester complies with the following domestic and international standards for medical Luer connections:
(1) GB/T 1962.1-2015: Syringes – Luer lock and Luer slip connections (China)
(2) GB/T 1962.2-2001: Medical syringes – Performance testing (China)
(3) ISO 80369: Small-bore connectors for liquids and gases in healthcare applications (International)
(4) ASTM F2394: Standard test method for Luer connectors (International)
Features
(1) Multi-function testing of leakage, gas tightness, separation force, torque, assembly ease, slip resistance, and stress cracking.
(2) Supports both locked and non-locked Luer connections.
(3) Adjustable parameters for axial force, separation force, internal water pressure, torque, and hold time.
(4) High-precision measurement with minimal error (≤1%).
(5) Compact and portable design for laboratory or production use.
(6) User-friendly interface with easy adjustment of test parameters.
Parameters
| Parameter | Specification |
|---|---|
| Nominal capacity | 1 mL – 60 mL (optional) |
| Axial force | 0 – 100 N, error ≤ 0.5% |
| Separation force | 20 – 40 N, error ≤ 1% |
| Internal water pressure | 200 – 400 kPa, error ≤ 0.5% |
| Torque | 0.01 – 0.5 N·m, error ≤ 0.5% |
| Hold time | 1 – 60 s, error ≤ 1 s |
| Dimensions (L × W × H) | 450 × 350 × 400 mm |
| Net weight | 28 kg |
| Standards | GB/T 1962.1-2015, GB/T 1962.2-2001, ISO 80369, ASTM F2394 |
Accessories
(1) Main unit – 1 set
(2) Fixture adapters for different Luer sizes – 1 set
(3) Pressure calibration kit – 1 set
(4) Operation manual – 1 set
(5) Power cable – 1 set
Test Procedures
(1) Select the appropriate Luer adapter for the device under test.
(2) Mount the syringe, needle, or catheter securely in the fixture.
(3) Set the required test parameters: axial force, separation force, internal pressure, torque, and hold time.
(4) Start the test cycle. The instrument measures all performance indicators in real time.
(5) Record and print the results, including any failures or deviations.
Maintenance Information
(1) Keep the tester clean and free from dust or fluid contamination.
(2) Inspect adapters and fixtures regularly for wear or damage.
(3) Calibrate pressure and torque sensors periodically to maintain accuracy.
(4) Store in a stable, dry environment.
(5) Follow electrical safety regulations during operation.
在线联系供应商
Other supplier products
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | The safety helmet high-temperature pre-treatment chamber is manufactured according to the GB/T2812-2019 standard for safety helmets and is primaril... |
 |
Reciprocating Wear Tester | Standards ASTM F2496: Scratch hardness and adhesion testing for prints/coatings. ISO 1518-1 & -2: Scratch resistance determination for paints... |
 |
Safety Helmet Lateral Rigidity Tester | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati... |
 |
Catheter Power Injection Flow and Pressure Tester | Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
