Thermal cycle wet freezing testing machine

Standard

• IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
• UL 1073: Standard for Safety for Enclosures for Electrical Equipment
• ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
• CE Certification(Conformité Européenne)

Product Advantages

1. Extreme Environmental Simulation
   • -40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.
   • 98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.
2. Ultra-Stable Performance
   • ±1°C Temperature Stability: Ensures consistent testing across 1,000+ cycles.
   • ≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.
3. Rapid Transient Response
   • IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).
   • Auto-Tuning PID: Adapts to payload changes in real-time.
4. Energy Efficiency
   • 40% Lower Power Consumption: Advanced insulation and heat recovery systems.
   • ECO Mode: Auto-powers down during stabilization phases.
5. Safety First
   • Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.
   • Door Interlock System: Prevents accidental chamber access during testing.

Product Features

• Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.
• 10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.
• Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.
• Self-Diagnostics: Real-time sensor health checks and error logging.
• Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Technical Parameters

Parameter	Specification
Temperature Range	-40°C to +85°C (operational)
Temperature Fluctuation	≤±1°C
Temperature Deviation	≤±1°C (at steady state)
Temperature Uniformity	≤±2°C (empty chamber)
Heating Rate	10°C/min (typical, configurable)
Cooling Rate	7°C/min (typical, configurable)
Humidity Range	30%–98% RH (non-condensing)
Humidity Deviation	±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume	500L (standard), expandable to 1,500L
Power Supply	380V/415V 3-phase, 50/60Hz
Dimensions	1,200mm (W) × 1,800mm (D) × 2,000mm (H)
Weight	800 kg (net) / 1,200 kg (gross)

Accessories Included

1. Testing Kit:
   • 4x universal sample racks (adjustable for batteries/PV modules/PCBAs).
   • 10x humidity sensor calibration capsules.
2. Software Suite:
   • License key forEnviroTest Pro(Windows/Linux).
   • 1-year free access to cloud-based test report generator.
3. Calibration & Safety:
   • NIST-traceable temperature/humidity logger.
   • Emergency eyewash station (portable).
4. Maintenance Kit:
   • Spare heating elements and refrigerant filters.
   • Chamber cleaning solution (non-corrosive).
5. Documentation:
   • Multilingual quick-start guide (printed + digital).
   • Compliance certificates for IEC/UL/ISO standards.

Other supplier products

	Safety Helmet High Temperature Pre-Treatment Chamber	Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Techni...
	Catheter bending resistance tester	Product introduction 　　The tester is composed of a programmable controller, a touch screen, a force sensor, a transmission device, an airborne ...
	Haze and Transmittance Meter	Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree of transparent plastics. This is the national standard of...
	Finished shoe bending tester	Product Introduction: Finished shoes bending testing machine Finished shoes bending testing machine Test shoes, casual shoes, work shoes and other...
	ozone exposure chamber manufacturer	Ozone test chamberApplication It is suitable for a series of tests on color fastness and color fastness to airborne contaminants, such as knitted ...

供应产品

Same products

	Gas Oxidizing Property Tester	卖方: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	卖方: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	卖方: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	卖方: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...