Computer-controlled Helmet Impact Tester
Application Scope
This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the impact - resistance performance and penetration - resistance of helmets.
Specifications
1 System components: consists of a crash test stand and an analysis recorder.
2 Crash test bench: composed of fall guidance device, head type, head type fixed frame, ball joint, anvil, anvil seat, release guidance system and seat base and other components.
3 Impact height: control interface setting, with guidance system, acceleration detection and calibration device (1000 ~ 3000mm can be customized)
4 Base: the optimal solution is made of reinforced concrete, the instrument's steel base is connected to the concrete base, so that its quality is not less than 1600kg.
5 Test and Analysis Instrumentation System: consists of acceleration sensors or impact sensors, amplifiers, and data processing, display and recording, and other components. Part of the composition
Standard
GB 811 GB 24429
GB/T 38305-2019 GA 44
IS 4151 (India)
DOT FMVSS No. 218 (USA)
ECE R22.05 (Europe)
EN 1078 (Cycling helmets)
IS 2925 (Industrial safety helmets)
Technical Specifications:
Dimensions (L*W*H*H cm): 90*80*450 (according to the order impact height)
Weight (kg): 350
Installation requirements:
1 Power supply: AC 220V 50Hz 500W
2 Environment: 10 ~ 35 ℃
3 Operation: floor, connected to the concrete pedestal
在线联系供应商
Other supplier products
 |
Adhesion Tester | The adhesion tester is a device specifically used to detect the strength of the adhesion of materials. The following is a detailed description of i... |
 |
Dry and Wet Retroreflectometer | Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us... |
 |
Multiphase High - temperature and High - pressure Explosion Limit Tester | Reference Standards: EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A Product Features: Technical parameters: Operating Environment (... |
 |
Residual Ethylene Oxide Gas Chromatograph | The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica... |
 |
Particle Abrasion Tester | The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
