Helmet Xenon Aging Tester
Standards
GB/T2014-9-19. ISO 4892
ASTM G151. G154. D4329
d4587、d4799、sae j2020
Xenon lamp aging test box structure
1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.
2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.
3. heating mode for the inner liner sink heating, warming fast temperature distribution.
4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.
Helmet xenon lamp aging test chamber applications
Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.
Xenon lamp aging test chamber features
1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.
2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.
3. unique condensation system using ordinary tap water can meet the requirements.
4、Water heater is under the container, not immersed in water, long life, easy maintenance.
5、Water level control is placed on the outside of the UV box, easy to monitor.
6. the equipment has casters, easy to move, casters are standard accessories.
8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable
9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).
9. there are Chinese and English manual, easy to access.
10. divided into ordinary, light amplitude illumination control type, spray type.
Xenon lamp aging test chamber technical parameters
1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved
2. there is an electronic eye irradiance control system
3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results
4、Humidity, condensation, water spray can cycle continuous test
5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures
6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces
Xenon lamp aging test chamber control system
1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.
2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).
3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.
4、Radiometer probe adopts fixed type, without loading and unloading every time.
5. radiation using high-precision display and measurement of ultraviolet irradiance meter.
6. light and condensation can be duly controlled can alternate cycle control.
在线联系供应商
Other supplier products
 |
Cleanliness automatic extractor | Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag... |
 |
Button Impact tester | Standards: ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments). Applicati... |
 |
Resistance of Materials to Molten Metal Splash | Description: The tester is according to the ISO 9185-2007.This International Standard specifies a method for assessing the heat penetration resist... |
 |
Intramedullary Nails Internal-fixation Pull-out Force Tester | Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—Pa... |
 |
Syringe needle flow tester | Product introduction It is a device used to detect the flow of syringes. The principle is to calculate the flow of syringes by measuring the ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st... |
