Oxidizing liquid time pressure tester
Product Description：
Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time/Pressure Test, 12.6.1 Test 2(c)(i): Time/Pressure Test, 23.4.1 Test C.1: Time/Pressure Test, and GB/T 21579-2008 Time/Pressure Test Method for Dangerous Goods.
Product characteristics：
1） Embedded processor, Windows CE operating system
2） 8-inch LCD touch screen can display the test status in real time
3） Automatic detection of pressure vessel air tightness （by detecting the initial pressure drop rate）
4） With ignition sound and light alarm function
5） Stainless steel seamless welded inner liner and pressure vessel, pressure sensor with corrosion resistance, high temperature resistance, high pressure resistance
6） Automatic timing and high-precision pressure detection system, real-time detection and display of pressure changes
7） With automatic pressure relief device, after the test, automatically punctured explosion-proof sheet, release pressure
8） Automatically draw the pressure curve
9） With reaction residue collection and anti-splash function to avoid external contamination of the sample
10） Remote ignition to ensure the safety of experimental personnel
11） The test process is fully automated without manual intervention, supporting parameter setting, data storage, viewing reports and other functions
Technical parameters:
|
Operating Environment |
(5 to 40)°C, <85%RH |
|
Pressure Transducer Response Capability |
Responds to pressure change from 0MPa-3MPa vessel cavity in 5ms |
|
Pressure Measurement Range |
(0 to 5)MPa |
|
Pressure Measurement Accuracy |
±0.1%FS |
|
Heating Method |
Electronic Ignition |
|
Burst Pressure of Rupture Disk |
2.5MPa ±5% |
|
Standard Timing Range |
(0 to 60)s |
|
Timing Display Resolution |
0.01ms |
在线联系供应商
Other supplier products
 |
Building material products single combustion tester | Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C... |
 |
Vickers hardness tester | Product Introduction: Vickers hardness tester uses computer software programming, optical measurement system. Through the soft key input, the meas... |
 |
Cleanliness automatic extractor | Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag... |
 |
Advanced Specific Surface Area and Micropore Analyzer | Test Principle Under low temperature conditions (e.g., liquid nitrogen bath, 77.3K), a certain amount of adsorbate gas (e.g., N₂) is introduced in... |
 |
Fire retardant coating test machine | Product details： Fire retardant coating test machineis composed of two parts: the main control box and the burning box. It is used in the laborato... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
