Xenon Arc Tester
Features and Benefits
1. A variety of filters are available. For example, daylight filters are used to simulate sunny days, and UV cut-off filters can shield specific ultraviolet bands to meet different test needs.
2. It can meet many international standards such as ISO 105B-06 and ASTM G155-1. and the test results are widely recognized.
3. Precise control of irradiance and blackboard temperature. The irradiance can be controlled at 35~150W/m², and the blackboard temperature range is 35~85℃±2℃.
4. SUS 304 stainless steel, mirror surface, rust-proof to high and low temperature and moisture corrosion resistance.
Specifications
|
Model |
STD XL-S-500 |
|
Internal Dimension (mm) |
500*600*700 mm |
|
Overall Dimension (mm) |
1000*1140*1920 mm |
|
Chamber Type |
Flat shelf |
|
Irradiation Source |
1 piece of 4500w water-cooled xenon arc lamp |
|
Irradiance Range |
35~150 W/㎡ |
|
Bandwidth Measurement |
300nm~400nm (340nm or 420nm) |
|
Chamber Temperature Range |
Ambient～100 ℃ ±2℃ |
|
Black Panel Temperature |
BPT 35～85 ℃ ±2℃ |
|
Humidity Range |
50% ~ 98% RH |
|
Humidity Deviation |
± 5% RH |
|
Water Spray Cycle |
1~9999H59M (Adjustable) |
在线联系供应商
Other supplier products
 |
Xenon Test Chamber | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunlight spectrum, including ultraviolet, visible light... |
 |
Knee Joint Prostheses Wear Tester | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
 |
Shoe heat insulation testing machine -- sand bath | The sand bath component of the shoe heat insulation testing machine is primarily used to test the heat insulation or thermal insulation performance... |
 |
Hydrostatic head Tester丨Hydrostatic head Test machine | Introduction The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water dropl... |
 |
Total Hip Joint Prostheses Wear Tester | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
