Bench UV Accelerated Aging Chamber
Application：
Bench-top UV Light Accelerated Aging Test Chamber is suitable for accelerated aging test through ultraviolet light, temperature and water exposure, used to predict the relative durability of non-metallic materials such as coating film, plastic, rubber, etc., especially suitable for observing the physics of particularly durable materials The degree of performance damage, such as reduced gloss, haze, reduced strength, chalking, cracking, blistering, embrittlement, and color fading.
Paint Industry: For testing various coatings, including:
Hull paint
Marine waterline paint
Deck paint
Solvent-based polyurethane wood paint for interior decoration
Water-based wood paint for interior decoration
UV-curing wood paint
Pre-coated coil coatings for home appliances
Indoor water-based wood coatings
Coil coatings
Architectural water-based fluorine coatings
Other Industries:
Automotive Industry: For evaluating paint and coatings.
Plastic Products: To assess UV degradation and durability.
Wood Products: Testing finishes and coatings for weather resistance.
Glue: To determine the effects of UV exposure on adhesive performance.
Like all artificial weather accelerated aging test equipment, the test results obtained by the desktop UV fluorescent ultraviolet aging test chamber cannot replace natural exposure to determine the actual durability of the material, but this instrument can provide a reliable relative test result, which is very useful for quick evaluation. Anti-aging properties of materials, screening or improving new and old formulas, and monitoring product quality are more practical.
Main Performance：
The Bench-top UV Light Accelerated Aging Test Chamber uses three 20W fluorescent ultraviolet lamps with a wavelength of 313nm as the experimental light source. During the test, basic parameters such as total light time, temperature in the box, and spray time can be set to simulate the nature of the outside world. The damage caused by the environment is used to evaluate the weather resistance of the model.
The all-stainless steel sandwich liner design will never rust and leak water, while effectively preventing water vapor in the working room from penetrating into the electrical part and damaging the electronic components.
Built-in water level switch, the machine will alarm and stop automatically when the water level is low.
Use the ultraviolet lamp tube produced by a professional company, the irradiation energy is high: the new lamp tube can reach 0.9W/m2.
The touch screen man-machine interface directly sets various parameters required for the test, and it is convenient to check the parameter running status during the test at any time.
Standards：
ASTM D4587: "Conducting Fluorescent UV Condensation Exposure Tests for Paints and Related Coatings"
ASTM D5894: "Painted Metals"
ASTM G154: "Standard for Fluorescent UV/Water Exposure of Non-Metallic Materials"
ASTM D4329: "Standard for Fluorescent UV/Water Exposure of Plastics"
SAE J2020: "Accelerated Exposure Standard for Automotive Exterior Materials"
ISO 11507: "Artificial Weathering Exposure of Paints and Varnishes Coatings Exposure to Fluorescent Ultraviolet Light and Water"
ISO EN 4892-3: "Plastics. Methods of Exposure to Laboratory Light Sources. Part 3: UV Fluorescent Lamps"
GB/T 14522: "Artificial Climate Accelerated Test Method for Plastics, Coatings, and Rubber Materials for Machinery Industry Products"
GB/T 23983: "Determination of Yellowing Resistance of Wood Coatings"
GB/T 23987: "Artificial Weathering Exposure of Paints and Varnishes Coatings Exposure to Fluorescent Ultraviolet Light and Water"
GB/T 16422.3: "Exposure Method of Plastic Laboratory Light Source Test: Part 3: Fluorescent Ultraviolet Lamp"
Technical Parameters：
| No. | Function | Parameter |
|---|---|---|
| 1 | Lamp model | UVA: 340nm or UVB: 313nm (Normal Use 1500H) |
| 2 | UV fluorescent lamps | Quantity 3 |
| 3 | Lamp irradiation energy | 0.7W/m² |
| 4 | Sample placement | Horizontal arrangement on six sides |
| 5 | Sample capacity | 18 pieces, (70×150mm) |
| 6 | The closest distance from the tube wall to the sample | 50 mm |
| 7 | Sample rotation speed | 3.7 c.p.m. |
| 8 | Temperature setting range | RT+5～65°C |
| 9 | Inlet pressure | 2.8-5.5 bar |
| 10 | Influent water purity | The PH of water is between 6.0 and 8.0. the conductivity is less than 5μm/cm, and the solids content is less than 1ppm |
| 11 | Water consumption | Condensation: 7L/day; Spray: 4L/min |
| 12 | Dimensions (W×H×D) | 940×630×500mm |
| 13 | Weight | 70kg |
| 14 | Voltage | 220V, 50Hz, maximum current 6A (110V is also available) |
Performance features:
Cost-Effective Lamps: Domestic UVA or UVB lamps are priced at less than 1/5 of the cost.
Spray and Temperature Function: The chamber includes spray and temperature control functions.
Test Standards Compliance: The chamber complies with various domestic and international test standards, with the ability to set different test procedures as needed.
Real-Time Data Acquisition: Test data is automatically generated in Excel format, recorded, and saved. It can be exported via a USB drive, enabling truly unattended operation.
Remote Monitoring: The chamber features a standard TCP/IP Ethernet interface, allowing users to remotely monitor the machine's status through a network.
Touch Screen Operation: The touch screen provides an easy-to-use, user-friendly interface, allowing users to view any parameter during the test at any time.
Precision Temperature Control: The chamber is equipped with a high-precision Pt 100 temperature sensor and automatic temperature control for accurate results.
在线联系供应商
Other supplier products
 |
KES - G5 Compression Tester | The Compression Tester analyzes hand movements-particularly, movements by finger-performed by artisans and professionals when judging a fabric's te... |
 |
Metal Bone Screws Self - tapping Tester | Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli... |
 |
Cork Puncture and Chip Detection Instrument | The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ... |
 |
Textile Fiber Composition Analyzer tester | Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2... |
 |
Safety shoe impact testing machine | The Safety Shoe Impact Testing Machine is designed to evaluate the impact resistance of protective toecaps in safety footwear by simulating the eff... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
