Model Coin-cell Swelling System

The Model Coin-Cell Swelling System is designed for in-situ measurement of thickness and volume changes of coin-type lithium-ion cells during charge and discharge processes. The system adopts high-precision non-contact laser displacement sensing to capture micron-level swelling behavior under controlled temperature and pressure conditions. It provides reliable and repeatable data for material screening, structural optimization, and safety evaluation of coin-cell batteries.

Application

(1) In-situ swelling and thickness change measurement of coin-type lithium-ion cells during cycling.

(2) Expansion behavior evaluation of standard coin-cell formats including 2032, 2025, and 2016.

(3) Screening and comparison of electrode materials such as graphite, silicon-based anodes, and solid-state electrolytes.

(4) Mechanical stability and fatigue analysis of electrode stacks under pressure cycling.

(5) Thermal–mechanical coupling analysis under high-temperature and low-temperature environments.

(6) Safety and reliability assessment during fast charge, overcharge, and abuse testing.

(7) R&D validation and quality consistency evaluation for laboratory-scale battery development.

Standards

(1) ASTM E83 – Standard Test Method for Verification of Linear Displacement Measuring Systems.

(2) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test (reference method).

(3) IEC 62660-2 – Secondary Lithium-Ion Cells – Reliability and Abuse Testing.

(4) DIN 51221 – Testing of Adhesives – Determination of Tensile Shear Strength (reference for deformation testing).

(5) CE Certification – Conformité Européenne.

Features

(1) Micron-level non-contact laser displacement measurement with high repeatability.

(2) High-resolution detection of subtle thickness and volume changes in coin cells.

(3) Multi-environment testing capability with integrated temperature chamber.

(4) Dynamic pressure loading for electrode stack fatigue and structural response analysis.

(5) Eight-channel parallel testing to improve screening efficiency and data consistency.

(6) Laser-guided positioning system for precise coin-cell alignment.

(7) Automatic thermal drift compensation during long-term cycling tests.

(8) Dual redundant safety protection with emergency stop function.

(9) Glovebox-compatible design for oxygen- and moisture-sensitive chemistries.

Parameters

Parameter	Specification
Displacement Range	±500 μm (linear), ±0.5° (angular)
Linear Measurement Accuracy	±0.05 μm
Angular Measurement Accuracy	±0.005°
Displacement Resolution	0.1 μm
Temperature Range	-20°C to 150°C
Temperature Ramp Rate	≤ 2°C/min
Pressure Range	0–10 bar
Test Channels	8 channels
Data Acquisition Rate	10,000 points/s/channel
Power Supply	AC 100–240 V, 50/60 Hz
Dimensions (W×D×H)	400 × 350 × 600 mm
Weight	65 kg (net) / 80 kg (gross)

Accessories

(1) Non-magnetic coin-cell holders for 2032, 2025, and 2016 formats.

(2) Laser displacement sensor modules.

(3) Temperature-controlled environmental chamber.

(4) Pressure loading and control unit.

(5) Data acquisition and analysis software.

(6) NIST-traceable displacement calibration standards (100 μm, 500 μm).

(7) Gas purification cartridge for inert atmosphere operation.

(8) Humidity sensor with data logging function.

Test Procedures

(1) Install the coin cell into the designated non-magnetic holder.

(2) Align the coin cell using the laser-guided positioning system.

(3) Set temperature, pressure, and cycling parameters according to test requirements.

(4) Initiate the charge/discharge process and start in-situ displacement monitoring.

(5) Record real-time thickness and swelling data throughout the test cycle.

(6) Export test data for further analysis, comparison, and reporting.

Maintenance Information

(1) Periodically calibrate the laser displacement sensors using certified standards.

(2) Inspect coin-cell holders and pressure components for wear or deformation.

(3) Clean optical and sensing components to maintain measurement accuracy.

(4) Verify temperature and pressure control performance at regular intervals.

(5) Maintain software updates and perform routine data backups according to laboratory procedures.

Other supplier products

	Zipper Fatigue Tester	Product Introduction: The functional life of a zipper is often determined by its ability to withstand numerous opening and closing cycles without ...
	Aluminum Tube Internal Coating Continuity Tester	The Aluminum Tube Internal Coating Continuity Tester is an important device specifically designed for testing the continuity of the internal coatin...
	PV-Panels Testing Devices	Features and Benefits 1. The capacity and performance of the workroom can be adjusted according to the size of the photovoltaic panel and your nee...
	Sanitary Napkin Absorption Speed Tester	The Sanitary Napkin Absorption Speed Tester is designed to measure the absorption speed of sanitary napkins, menstrual pads, diapers, and other abs...
	Lowest Ignition Energy (MIE) Dust Cloud Analyzer	Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device throug...

供应产品

Same products

	Gas Oxidizing Property Tester	卖方: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	卖方: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	卖方: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	卖方: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...