Conveyor Belt Drum Friction Testing Machine
Main Purposes of Conveyor Belt Drum Friction Testing Machine
The conveyor belt drum friction testing machine has extensive application value in multiple fields. Its main purposes include:
Evaluating Conveyor Belt Performance
This equipment is mainly used to evaluate the performance of conveyor belts under drum friction conditions, especially their anti - friction, anti - wear, and flame - retardant properties. By simulating the friction conditions in actual working environments, it can test the durability and reliability of conveyor belts, providing data support for product optimization design.
Material Selection and R & D
During material research and development, the conveyor belt drum friction testing machine can be used to screen materials with excellent wear - resistance and anti - friction properties. By comparing the test results of different materials, it can provide a scientific basis for material selection and reduce product R & D costs.
Optimization Design
Based on the test results, the structure and materials of conveyor belts can be optimized to improve their service life and performance. At the same time, it can also provide improvement suggestions for drum design to reduce friction loss and energy consumption.
Scientific Research and Teaching
In the field of scientific research, the conveyor belt drum friction testing machine can be used for research on friction and wear mechanisms, material surface modification, etc. In teaching, this equipment can be used to cultivate students' practical abilities and scientific research qualities, improving the quality of teaching.
Technical Parameters：
Overall power 11.2KW
Power supply AC380V 50Hz three-phase five-wire system
Drum motor power 11KW
Drum material 45# steel, nitriding treatment
Drum load speed 200±5r/min
Micro blower power: 220V, 25W
Blowing wind speed 2.0±0.1m/s; air flow rate can be adjusted.
Porous tube diameter: Φ40 (inner diameter), ventilation holes inner diameter Φ: 6mm 21. spacing 13mm
Porous tube and drum distance: 600mm
Weight 900kg
Dimensions Mechanical Cabinet 1400 * 860 * 1900mm Electronic Control Cabinet 1500 * 760 * 1700mm
Apply tensioning force weights 343N weights five (a weight can be automatically applied to tensioning, 2-5 weights need to be manually applied to tensioning), automatic disconnection of the tensioning force, the automatic disconnection of the tensioning force, the automatic disconnection of the tensioning force. Apply tension), automatic belt break detection
Test time recording range 99 hours, 60 minutes and 60 seconds, digital display adjustable, set the time parameter value reaches the automatic shutdown.
Temperature measurement range: room temperature-400°C, automatic over-temperature detection and shutdown, temperature measurement accuracy: ±1°C.
在线联系供应商
Other supplier products
 |
Appliance Stability meter | Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1 and other standards. The device is composed of a workbe... |
 |
Initial Bonding Strength Testing Apparatus | The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t... |
 |
Heel impact fatigue testing machine丨Heel impact fatigue tester | Main uses: Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance index of women's high heels, mid-heels and o... |
 |
Dry microbial penetration resistance tester | DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulate... |
 |
Rattle tester | Bell Rattle Toy Tester： Also known as: Sound-emitting toy tester Toy test template AB Anti-choking test device Simulates children's oral cavit... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
