Battery Adiabatic Calorimeter
Battery adiabatic calorimeters play a crucial role in battery research and development, providing essential thermodynamic data for safety assessment, performance optimization, energy efficiency analysis, and lifespan prediction.
Application
Battery adiabatic calorimeters are widely used in the research, testing, and safety evaluation of batteries and battery packs. They can provide thermal characteristic data of batteries during charging and discharging processes, offering crucial support for battery design and optimization. These instruments play a key role in battery thermal safety assessment, thermal management system performance evaluation, and material thermal safety testing.
Standards
GB/T 36276 - 2023:Lithium-ion Batteries for Electric Power Energy Storage
UL 9540A:Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems
ASTM E1981 - 98(2012):Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry (DSC)
SN/T 3078.1 - 2012:Guidelines for the Evaluation of Thermal Stability of Chemicals - Part 1: Accelerated Calorimetry Method
USABC SAND99 - 0497:This is a specific test protocol document from the United States Advanced Battery Consortium (USABC), and it doesn't have a widely recognized single "English name" in the same sense as formal standards. It could be referred to as "USABC Thermal Stability Test Protocol SAND99 - 0497"
SAE J2464 - R2009:Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing
Freedom CAR SAND 2005 - 3123:Similar to USABC SAND99 - 0497. it is a specific technical document from the Freedom CAR program. It could be called "Freedom CAR Thermal Stability Test Document SAND 2005 - 3123"
UL 1973:Batteries for Use In Stationary and Vehicle Auxiliary Power Applications
GB 38031 - 2020:Safety Requirements for Power Batteries of Electric Vehicles
Features
Precision: The self - heating detection sensitivity is far better than the standard detection threshold of 0.02°C/min. It has high thermal insulation performance and a small temperature difference between the wall and the sample.
Efficiency: With an innovative heating wire assisted heating solution, the experimental efficiency can be increased by up to 5 times.
Safety: It is equipped with safety protection measures such as burst discs, pressure relief valves, and explosion - proof boxes. The professional alarm system design comprehensively ensures the safety of personnel and equipment.
Innovation: It has the innovative function of adiabatic thermal runaway - gas production combined analysis, enabling a comprehensive acquisition of the characteristic parameters of battery thermal runaway.
Parameters
| Description | Details |
|---|---|
| Adiabatic chamber effective size | Diameter: 800mm, Depth: 520mm |
| Self-exothermic detection sensitivity | Better than 0.02℃/min |
| Constant temperature wall sample temperature difference | ≤ 1℃ |
| Temperature control range | RT ~ 300℃, with low temperature module up to -25℃ |
| Working pressure range | 0 ~ 2MPa |
| Temperature tracking rate | 0.02 ~ 15℃/min |
| Needle maximum stroke | Stroke can be set up by software |
| Charge and discharge electrode column overcurrent capacity | -1000A ~ 1000A |
Accessoriess
Temperature control and insulation components
Safety and protection components
Gas processing components, etc.
Test Procedures
Sample Preparation: Preparation work includes battery surface treatment, SOC adjustment, and information recording.
Temperature Difference Baseline Calibration: During sample installation, the sample thermocouple is attached to the center of the sample's large surface, ensuring its relative position is consistent with the aluminum block in the furnace chamber.
Experimental Parameter Settings: The recommended experimental temperature range covers 50℃~200℃ to ensure that the Tonset detection value falls within this range and to avoid false detection.
Experiment Execution: During the test, the sample heating wire heats the sample according to the set heating program. The sample temperature sensor detects the sample temperature, and other sensors in the test chamber detect the ambient temperature inside the chamber.
Data Recording: The sample is heated using a direct contact method with thermocouples. Multiple temperature sensors are placed in various locations, including sensors directly attached to the sample, as well as sensors on the top, bottom, and side walls of the test chamber, and a pressure sensor, to monitor the entire test in real time.
Results Analysis: The changes in sample temperature, pressure, temperature rise rate, and pressure rise rate over time are obtained. Data analysis is performed to obtain multiple sets of thermal characteristic parameters, including initial decomposition temperature, exothermic rate, reaction heat, activation energy, and pressure rise rate.
在线联系供应商
Other supplier products
 |
Molten Metal Penetration Resistance Tester | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu... |
 |
Particle Strength Test machine | The Particle Strength Tester is a high-precision instrument designed to measure the mechanical strength of individual particles, granules, and cata... |
 |
Foam Repeated Compression Tester | Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression plate of the testing m... |
 |
Damp Heating Chamber for PV Modules | Features and Benefits 1.Support wet heat (85 ° C /85%RH) and extended temperature/humidity, comprehensive PV module aging test. 2.Compliance ... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
