.

Gas Oxidizing Property Tester

Product Description

Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylinder Valve Exhaust Ports by Determination of Combustion Potential and Oxidizing Ability” Chapter 4 Oxidizing ability of gases and gas mixtures, and GB/T 27862-2011 “Test Methods for Classification of Chemicals by Hazard Combustion Potential and Oxidizing Ability of Gases and Gas Mixtures” Chapter 4 Oxidizing Ability of Gases and Gas Mixtures.

Standards

ISO 10156-2010

GB/T 27862-2011

GAT536

NY/T 1860

Product Features

1. The test device and the control system adopt a split - structure design to ensure the safety of the instrument control unit and experimenters. 2. PC operation software is provided as a supporting part, reducing the operation difficulty of the instrument. 3. It supports remote - controlled ignition to ensure the safety of experimenters. 4. It is equipped with a high - precision pressure sensor, which can accurately measure the explosion pressure and control the concentration of gas partial pressure ratio. 5. It is equipped with a magnetic stirring device. 6. It has the function of an electronic micro - processor to control the ignition time. 7. It has an automatic cleaning function. 8. It is equipped with an automatic pressure - relief device. After the test is completed, automatic pressure - relief can be selected to release the pressure in the test tank. 9. It has multiple explosion - proof functions to ensure the safety of experimenters. 10. It has a fault - detection function and automatic audible and visual alarm functions. 11. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.

Technical parameters

Operating Environment

(5 to 40)°C, <85%RH

Test Tank Material

Stainless Steel 316L

Test Tank Maximum Pressure

≥3000kPa

Test Tank Volume

≥0.005m³

Test Tank Fittings

Magnetic Stirrer

Ignition System Metal Rods

Diameter ≥3mm

Nickel Chromium Wire Diameter

(0.05 to 0.2)mm

Ignition Energy

(10 to 20)J

Explosive Pressure Transducer Detection Range

(0 to 5000)kPa

Explosive Transducer Pressure Resistance

≥10MPa

Explosive Transducer Measurement Accuracy

±0.1%FS

Explosive Transducer Response Time

≤1ms

Dispensing Gas Transducer Detection Range

(0 to 200)kPa

Dispensing Gas Transducer Measurement Accuracy

±0.1%FS

Temperature Measurement Range

(0 to 350)°C


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Bally Type Flexometer丨Bally Type Flexometer Meter
Bally Type Flexometer丨Bally Type Flexometer Meter Standards EN ISO 20344:6.6. I.U.P.10+20. I.U.P.20. UNI 4818. DIN 53.351. UNE/I.U.P.20 Applications The Bally flexometer is the internationally-a...
Leather thickness tester
Leather thickness tester Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f...
Surgical Mask Flame Retardant Tester
Surgical Mask Flame Retardant Tester Flame-retardant tester for surgical mask, In case of the mask is accidentally exposed to flame, its flame-retardant performance is directly related...
Urinary Catheter Strength Tester
Urinary Catheter Strength Tester The Urinary Catheter Strength Tester is designed to evaluate the physical strength and mechanical properties of urinary catheters. It provides accu...
Digital display electronic ink viscosity meter
Digital display electronic ink viscosity meter How it works: The working principle of the digital display electronic ink viscosity meter is based on two tin (usually a metal roller and a rubber...
供应产品

Same products

Gas Oxidizing Property Tester
Gas Oxidizing Property Tester 卖方: Standard International Group (HK) Limited Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
Battery Powder Compaction Density Measurement System
Battery Powder Compaction Density Measurement System 卖方: Standard International Group (HK) Limited The Battery Powder Compaction Density Measurement System is a precision testing system designed...
Battery Powder resistance tester
Battery Powder resistance tester 卖方: Standard International Group (HK) Limited The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
KES-SESRU surface roughness/friction tester
KES-SESRU surface roughness/friction tester 卖方: Standard International Group (HK) Limited TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...