Particle Abrasion Tester
The Particle Abrasion Tester (Q-4D) is a precision instrument designed to measure the wear rate of granular materials such as catalysts, molecular sieves, adsorbents, activated alumina, and wood activated carbon. Based on national standards, it provides a controlled and repeatable method for evaluating particle durability under simulated industrial conditions. The Q-4D improves upon its predecessor (Q-3) with enhanced performance, optimized structure, and greater operational stability, making it suitable for chemical, pharmaceutical, petroleum, and material research laboratories.
Application
(1) Determining wear rate of fertilizer catalysts, molecular sieves, and adsorbents
(2) Evaluating the mechanical durability of industrial activated alumina
(3) Testing strength and abrasion resistance of wood activated carbon
(4) Quality control in chemical and pharmaceutical production
(5) Research and development for new granular materials with improved durability
(6) Comparative testing of particle materials to optimize process efficiency
Standards
(1) GB 3636-83 — Method for determination of wear rate of catalysts, molecular sieves, adsorbents
(2) GB 10504-2008 — 3A Molecular Sieve
(3) HG/2524-2011 — 4A Molecular Sieve
(4) GB 13550-92 — 5A Molecular Sieve
(5) GB/T 12496.22-90 — Test method for strength determination of wood activated carbon
(6) HG/T 3927-2007 — Industrial activated alumina wear testing
(7) ISO 3270 — Determination of particle size distribution and durability of granular materials (international standard reference)
(8) ASTM D4179 — Standard test method for wear of granular catalysts
Features
(1) Stepper motor with single-chip microcomputer control for precise, stable, and uniform grinding speed
(2) Low noise operation for improved laboratory comfort
(3) LED indicators display real-time working status clearly and intuitively
(4) Adjustable speed settings (25–100 r/min) to accommodate different material types and test requirements
(5) Functions include preset speed, alarm settings, and automatic pause for enhanced safety and control
(6) Dual grinding cylinder sizes (Φ36×300 mm and Φ50×300 mm) for versatility
(7) High stability and low failure rate, ensuring long-term reliable operation
(8) Simple and intuitive operation, suitable for routine laboratory and industrial testing
Parameters
| Item | Description |
|---|---|
| Speed range | 25, 30, 40, 50, 60, 80, 100 r/min (adjustable) |
| Counting range | 0–9999 r |
| Grinding cylinder inner size | Φ36×300 mm; Φ50×300 mm (two each) |
| Power supply | AC 220V ±10%, 50 Hz |
| Noise | Low, <60 dB(A) |
| Control system | Single-chip microcomputer with stepper motor |
| LED indicators | Display operational status, speed, and alarms |
| Overall dimensions | 400 × 300 × 450 mm (L × W × H) |
| Net weight | 28 kg |
Accessories
(1) Grinding cylinders (Φ36×300 mm and Φ50×300 mm)
(2) Sample loading trays
(3) Power cord and fuse
(4) User manual
(5) Calibration tools
Test Procedures
(1) Select and install the appropriate grinding cylinder for the material to be tested
(2) Load the sample material into the grinding drum evenly
(3) Set the desired rotation speed using the touch interface or control knob
(4) Preset the test count or duration, and enable alarm/pause settings if required
(5) Start the test and monitor LED indicators for real-time operational status
(6) At the end of the test, remove the sample and evaluate the wear rate based on weight loss or particle size change
(7) Record the results and repeat as necessary for additional samples
Maintenance Information
(1) Clean the grinding cylinders and drum after each test to prevent contamination
(2) Periodically check the stepper motor and electronic control system for proper function
(3) Inspect LED indicators and connections for reliability
(4) Replace worn grinding cylinders to maintain consistent test results
(5) Store the instrument in a clean, dry environment to protect electrical components
在线联系供应商
Other supplier products
 |
Deval Abrasion Resistance Testing Equipment (for Deval abrasion testing machine) | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
 |
Micro Rapid Closed Cup Flash Point Tester | Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094 GB/T 261. GB/T 21615. ASTM D93 GB/T 5208. GB/T 21790. A... |
 |
Bearing Friction Torque Measuring device | Standards GB/T 32562-2016 JJF1137-2024 Main Purposes The bearing friction torque tester is a precision instrument specifically designed for mea... |
 |
20L Spherical Explosion Tester | Product Description: 20L Spherical Explosion Tester is characterized by accurate test data and ease of use. Its through the compressed air will be... |
 |
Syringe piston thrust tester | Product introduction The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
