Cigarette Draw Resistance Tester
The Cigarette Draw Resistance Tester is designed to measure the airflow resistance encountered by a cigarette during the smoking process. By simulating normal smoking conditions, it provides precise and objective data that supports quality control, product development, and regulatory compliance in the tobacco industry.
Application
(1) Measurement of cigarette draw resistance for quality control during manufacturing.
(2) Evaluation of airflow characteristics for research and development of new tobacco blends, filter designs, and rolling processes.
(3) Random inspections by tobacco regulatory and inspection agencies to ensure products meet relevant standards.
(4) Monitoring and controlling batch-to-batch consistency of draw resistance in production lines.
(5) Verification of filter performance and ventilation design.
(6) Comparison of different cigarette types (e.g., king-size, slim, unfiltered) for sensory quality evaluation.
(7) Assessment of cigarette draw resistance in product optimization and consumer preference studies.
Standards
(1) ISO 6565 – Cigarettes — Determination of draw resistance.
(2) CORESTA Recommended Method No. 6 – International protocol for cigarette draw resistance testing.
(3) GB/T 33029 – China national standard for cigarette draw resistance.
(4) Other applicable national standards depending on the country of manufacture or sale.
Features
(1) Objective Measurement – Provides precise, quantitative evaluation of draw resistance.
(2) Rapid Testing – Average test time of 15 seconds per cigarette.
(3) Automated Operation – Many models offer automatic clamping, testing, and data processing.
(4) Non-Destructive Testing – Test performed on unlit cigarettes without altering their structure.
(5) Real-Time Data Display – Digital output for immediate analysis and quality monitoring.
(6) Versatile Application – Suitable for production, R&D, and regulatory inspections.
Technical Parameters
| Parameter | Specification |
|---|---|
| Measuring Range | 0–10 kPa |
| Resolution | 1 Pa |
| Test Error | <1 % |
| Test Time | ~15 seconds per sample |
| Test Port Inner Diameter | 7.7 mm |
| Test Port Depth | 9 mm |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Data Output | USB port for computer communication |
| Operating Environment | Room temperature, standard laboratory conditions |
Accessories
(1) Standard cigarette holders/clamps.
(2) Calibration reference devices for pressure and airflow verification.
(3) Software for data logging, analysis, and reporting.
(4) Spare seals and gaskets for test ports.
Test Procedures
(1) Place the unlit cigarette into the clamping device.
(2) Configure the airflow speed according to the selected standard.
(3) Initiate the test; the system measures the pressure difference across the cigarette.
(4) Data processing system calculates the draw resistance value in Pascal (Pa).
(5) Display results on the digital interface or export via USB.
(6) Repeat for multiple samples to ensure batch consistency.
Maintenance Information
(1) Clean test ports and clamps after each use to prevent residue buildup.
(2) Calibrate pressure sensors and airflow system regularly.
(3) Avoid exposure to excessive dust, moisture, or vibration.
(4) Check USB connectivity and software updates periodically.
(5) Inspect mechanical clamps for wear or damage to ensure accurate readings.
在线联系供应商
Other supplier products
 |
In-situ Gas Analysis System for Lithium Battery Thermal Runaway，thermal runaway gas monitoring system | The In-situ Gas Analysis System for Lithium Battery Thermal Runaway is an advanced testing platform designed to trigger and monitor battery thermal... |
 |
Battery diaphragm permeability tester | Meet the standard: GB/T458. ISO536/2. QB/T1667. GB/T23227. ISO2965. YC/T172. GB/T12655. S05636/3. IS05636/5. GB/T20042.7-2014. GB/T36363-2018. et... |
 |
Glove thermal insulation performance tester | Application The tester is primarily used in the following scenarios: Evaluating thermal resistance of household and industrial gloves Assessing ... |
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
 |
Rubber non-rotor vulcanization Tester | The Rubber Non-Rotor Vulcanization Tester is a precision instrument designed for the rubber processing industry to monitor and control rubber mater... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
