Thermal - Cold Cycle Testing Machine
The Thermal-Cold Cycle Testing Machine is a professional equipment used for high and low-temperature reliability testing. It is primarily used in fields such as electronics, electrical engineering, automotive, and aerospace, to test the performance of materials and components under extreme temperature conditions. It conforms to GB/T2423.1.2.3 standards and supports three test modes: high temperature, low temperature, and thermal shock. Rapid temperature switching can be achieved through a two-chamber or three-chamber structure.
Applications
1. Electronics and Electrical Engineering: Testing the temperature stability of chips, batteries, etc., to meet industry standards;
2. Automotive Industry: Verifying the temperature resistance of automotive electronics and body materials;
3. Materials Science: Screening the temperature tolerance of plastics and composite materials to support material selection;
4. Aerospace/Defense Industry: Adapting to extreme temperature change scenarios to ensure stable equipment operation;
5. Medical/Construction Materials: Verifying the temperature durability of medical equipment and building materials to meet compliance requirements.
Standards
BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber).
Adaptive Certification: Configurable to meet ISO, ASTM, and EN standards upon request.
Features
Dual Models for Diverse Needs:
1769 Series (Pressurized): Operates up to114°Cwith integrated pressure chamber for BS 7291 compliance.
1770 Series (Non-Pressurized): Cost-efficient solution for tests up to95°C.
Smart Sample Management:
Adjustable tension rig with load cell (0–500N) for real-time strain monitoring.
Perforated wall panels and custom fixtures for irregularly shaped specimens.
Safety & Efficiency:
Dual-access doors (single/double-hinged) for ergonomic loading.
Self-cleaning water circuit minimizes maintenance downtime.
Connected Workflow:
IoT-ready controller with 7-day auto-sequencing and cloud data backup.
Multi-language HMI (English, French, German, Chinese) with audit trail logging.
Technical Parameters
| Specification | 1769 Series (Pressurized) | 1770 Series (Non-Pressurized) |
|---|---|---|
| Temperature Range | -20°C to 114°C | -20°C to 95°C |
| Max. Test Pressure | 16 bar (232 psi) | N/A |
| Flow Rate | 25 m³/h (108 GPM) | 25 m³/h (108 GPM) |
| Max. Sample Ø | 160 mm | 160 mm |
| Power Supply | 380V/50Hz 3-phase (CE certified) | 220V/60Hz single-phase (UL listed) |
| Chamber Volume | 850L (expandable to 1.200L) | 600L |
| Dimensions (W×D×H) | 1.200mm × 800mm × 1.900mm | 900mm × 700mm × 1.700mm |
| Weight | 680 kg (net) | 520 kg (net) |
Accessoriess
1.Chamber Access:
Single-hinged door (standard) or dual-swing doors for walk-in loading.
2.Sample Fixation:
Adjustable racks for pipes/fittings (Ø16mm–Ø160mm).
Custom perforated walls for bundled specimens.
3.Tension Control:
Motorized tension rig with 0.1N resolution load cell.
4.Extended Warranty:
3-year comprehensive coverage for critical components.
5.Calibration Kit:
NIST-traceable temperature/pressure sensors with certificate.
Test Procedures
1. Pre-test Preparation
Check that the instrument's power supply and cooling/heating systems are functioning correctly, replenish the circulating medium, clean any impurities from the test chamber, and calibrate the temperature sensor.
2. Sample Preparation and Installation
Cut the sample according to testing requirements, record the sample's basic information, place the sample smoothly into the test chamber, avoiding stacking, and ensure the sample does not touch the chamber walls.
3. Parameter Settings
Select the test mode via the control panel, set the high and low temperature thresholds, constant temperature duration, number of cycles, and heating/cooling rate. Save the parameters after confirming their accuracy.
4. Starting the Test
Close the test chamber door, press the start button, and the instrument will automatically run according to the set parameters, monitoring the panel temperature and operating status in real time.
5. Test Monitoring
During operation, observe the instrument for any abnormalities, record changes in the sample's state during the temperature cycling process, and prevent sudden malfunctions from affecting the test.
6. Test Completion and Cleaning
After reaching the set number of cycles, the instrument will automatically shut down. After the chamber temperature returns to room temperature, open the chamber door, remove the sample and record the test results, clean the test chamber, turn off the instrument power, and organize the test data.
在线联系供应商
Other supplier products
 |
Falling ball impact testing machine | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material... |
 |
UV curing light box | Standard ISO 10977: Adheres to industrial standards for UV curing of adhesives and coatings. ASTM E3022: Meets requirements for radiometric measu... |
 |
Vacuum Ball - Disk Friction Tester | A vacuum ball-on-disk friction tester is a device used to simulate friction and wear behavior under actual operating conditions, in order to evalua... |
 |
Luggage rod reciprocating fatigue tester | Design criteria: QB/T 2919-2010 Theory： luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequ... |
 |
Perspiration Tester 丨Perspiration Test machine | Compliant Standards ISO 105 E01: Textiles - Tests for colour fastness - Part E01: Colour fastness to water ISO 105 E02: Textiles - Tests for colo... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
