Non-combustibility Tester
Non-combustible material refers to the material when it is heated by the fire even if it become the red or melting, which will not occur burning. Non-combustibility tester is designed by the new GB8624-2012 building materials fire classification requirements in the mandatory testing project , But also fully meet the GB / T 5464 and ISO 1182 international standards. Furnace temperature can quickly reach the temperature balance into the test program. The temperature curve is free to print.
Standards
GB/T 5464Method for non-combustibility test of building
ISO 1182Reaction to fire non-combustibility test of building products-non-combustibility test
BS 476-4Fire tests on building materials and structures-Full-scale room test for surface products
BS 476-11Method for assessing the heat emission from building materials
ASTM E 136Standard test method for behavior of materials in a vertical tube furnace at 750℃
Technical Parameters
|
Items |
Parameters |
|
Dimension |
500mm x 500mm x 1500mm |
|
Weight |
50kg |
|
Power |
220V,50Hz, 1500W |
|
Air flow hood |
Φ75mm×500 mm |
Features
Patented design intelligent test system;
Stainless steel burner, beautiful and easy to clean up;
Heating furnace:Φ95mm ×Φ75mm × 150 mm;
3 mm × 0.2 m nickel 80% chromium 20% resistance band;
Equipped with airflow hood;
Thermocouple: Insulated nickel-chromium-nickel-aluminum armorΦ3mm /Φ0.3mm;
Power controller, control test power;
The experiment began to temperature equilibrium time of about 35min;
Thermometer: 0 ~ 1000℃± 5%.
Systems
High degree of automation, the test processissafe and reliable, easy to operate;
The use of high-quality bar heater, the furnace temperature can rise to 900℃;
Programmable controllers (PLCs) automate the heating process by using modern electronic devices,cangreatly extendthe life of the furnace;
PLC output signal control heating voltage is 0-110VAC. Eliminate the effect of voltage fluctuation on temperature;
PLC added solid state relay to achieve PID control heating;
Built-in new furnace temperature, calibration temperature, the normal test temperature three procedures;
Embedded integrated 7 "touch screen can be set to control the parameters set and display / experimental data acquisition and preservation / screen monitoring / real-time temperature curve display / historical curve and data query;
With sound alarm and alarm accident display function.
在线联系供应商
Other supplier products
 |
Air Permeability Tester STD- F8 | The Air Permeability Tester is designed to quickly and accurately measure the breathability and permeability of a wide range of samples, from those... |
 |
Cosmetic UV protection tester | Instrument Purpose: Used to evaluate the protective performance of cosmetics against solar ultraviolet (UV) radiation under specified conditions. ... |
 |
Mask Visual Field Tester丨Mask Visual Field Test machine | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: EN 1... |
 |
Bone Plates Four-point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million ... |
 |
Standard light source sample table | Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant... |
Same products
 |
Room Corner Test Machine, ISO 9705. En 14390 | 卖方: Standard International Group (HK) Limited | Introduction： According to ISO 9705 of building materials fire prevention performance standards,... |
 |
Solid Combustion Rate Tester，burn rate tester for defense R&D | 卖方: Standard International Group (HK) Limited | Product Introduction This product complies with "Recommendations on the Transport of Dangerous G... |
 |
Building material flame retardancy test furnace，building code compliance equipment | 卖方: Standard International Group (HK) Limited | Technical parameters: Gas used: methane flow rate (35 ± 0.5)L/min, its purity is greater ... |
 |
Battery combustion tester，Battery Cell Fire Tester，IEC 62281 | 卖方: Standard International Group (HK) Limited | Product Description Battery combustion tester is a device that can be applied to the safety test... |
 |
UL94 Horizontal Vertical Flame Tester，dual-axis flame tester | 卖方: Standard International Group (HK) Limited | Introduction Rubber horizontal vertical flame testeris designed to simulate the early firing sit... |
