Burning heat value tester for building materials,Building material combustion calorific value calorimeter
Scope of application:
It is suitable for measuring the calorific value of solid and wavy combustible materials such as anthracite, bituminous coal, lignite, heavy oil, building materials and biomass fuel.
Meet the standard:
GB/T213-2008 "Coal calorific value determination method"
ASTM D5865-13 - Determination of Calorific Value of Coal and Coke
GB/T384-1981 "Determination of calorific value of Petroleum products"
GB/T30727-2014 "Determination of calorific value of solid biomass fuel"
ISO 1928:2009 Determination of calorific value of solid fossil Fuels
Technical features:
1. The test process is controlled by the computer, automatic water injection, no need to adjust the water temperature, just put the aerobic bomb into the barrel, the instrument can automatically complete the test.
2. Automatically calculate statistical data such as average value and standard deviation.
3. Can be connected to the electronic balance and printer, automatically read the sample weight, simple operation, friendly interface, good fault tolerance.
4. Strong data processing ability, historical data can be checked, can be printed, with data upload function, can realize real-time data sharing.
Technical parameters:
Heat capacity: about 10500J/K
Thermal capacity stability {<}0.15%
Resolution :0.0001° C
Oxygen bomb pressure :20MPa
Inner cylinder capacity :2.3L
Outer cylinder capacity :35L
Repeatability: Repeatability relative standard deviation ≤0.1%
Test time: About 15 minutes
Ignition voltage :24V
在线联系供应商
Other supplier products
 |
Full Notch Creep meter | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempera... |
 |
Thermal - Cold Cycle Testing Machine | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification... |
 |
Fiber Crimp Elasticity meter | Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index... |
 |
Carpet Abrasion Resistance Tester | Standard ASTM D4157(Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)) ISO 12947-2(Textiles - Deter... |
