Solid Combustion Rate Tester，burn rate tester for defense R&D
Product Introduction
This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test N.1: Test Method for Flammable Solids issued by the United Nations, GB/T 21618 - 2008 Test Method for Burning Rate of Flammable Solids in Dangerous Goods, and NY/T 1860.15 - 2010 *Guidelines for Physicochemical Property Testing of Agricultural Chemicals - Part 15: Solid Flammability.
Product Features
1. It adopts an embedded processor and Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time. 3. It integrates two functions, "sieving experiment" and "combustion rate experiment", into one. 4. It is applicable to the detection of two types of sample materials: non - metallic powder and metallic powder. 5. It is equipped with a standard stacking mold and features a user - friendly shaking handle design. 6. Strictly in accordance with standard requirements, an ignition torch is used for the sieving experiment, eliminating the need for a gas cylinder and ensuring safety. 7. A nitrogen rod is used as the ignition source for the combustion rate experiment. The material has high stability, and the ignition source temperature detection device ensures that the ignition temperature reaches above 1000°C. 8. It uses full - automatic infrared flame detection technology, which can reliably detect open flames and smoldering phenomena, ensuring detection accuracy. 9. It has a fault - detection function and audible and visual alarm functions to ensure the safety of the experiment. 10. The experimental process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical parameters
| Operating environment | (5~40)°C, <85%RH |
| Ignition source temperature | ≥1000°C |
| Ignition method | Gas igniter with nitrogen-silicon rod |
| Combustion detection stroke | (0~250)mm |
| Combustion distance measurement accuracy | ±0.5mm |
| Timing range | 5min (non-metallic); 20min (metallic) |
| Timing display resolution | 0.1s |
| Pile stack mold | Triangular-shaped molds 260mm long, 20mm wide, profiled to an inner height of 10mm |
| Burner plate | Flat plate made of corundum mullite, impervious to penetration, non-combustible, and with low thermal conductivity |
在线联系供应商
Other supplier products
 |
Helmet Strap Tensile Tester | The helmet strap tensile testing machine is designed to simulate tensile, impact, and durability loads encountered in actual use, accurately evalua... |
 |
Thermal Protective Performance Tester (TPP)，Digital TPP Heat Resistance Tester | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrating to fabric for the liner material, feather or fi... |
 |
Flame retardant paper and board burning tester | Technical parameters: 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% ... |
 |
Aerosol Foams Flammability Tester，Automatic Reaction Calorimeter | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
