3 Metre Cube Smoke Density Tester ，IEC61034，Smoke Density Test Chamber

None halogen cables and materials are required to measure smoke density; the main principles of the smoke density is measured in a particular space, cable or material in a particular combustion or radiation condition, which will produce smoke, the light beam will decay after passing through the smoke,so the light density and smoke density can be calculated by measuring the light transmittance.

TESTECH Wire and Cable Smoke Density Tester comply with IEC61034-1 ~ 2: 1997"Measurement of smoke density of cables and optical cables under specified conditions".It is used for the measuring power transmission signal or all insulated metallic conductor cables under specific conditions is horizontal burning emitted smoke the transmission rate of the test.The standard IEC 61034 requires smoke box size is 3M³.

Standards：

• IEC61034

Structural features:

1. The box is composed of a cube shell with long, wide and high 3000mm + 30mm,and the internal material is SUS 304 stainless steel;

2. The internal toolings are all made of stainless steel,corrosion-resistant;

3. The total area of the vent is 50cm2 ± 10cm2. it is opened during the test,baffle height is 1000mm;

4. Equipped with wire and cable test stands and hang-heavy weights according to standard requirements;

5. Test room has a glass observation window on the door,and the opposite side of the door is provided with a sealed transparent window (minimum 100mmx100mm), which can transmitting light for the measurement system.It's about 2150mm+100mm high from the ground;

6. Photocell and the light source is positioned at the center of each window on two walls;

Smoke Density Test System：

1.Llight source: clean crystal lamps and tungsten halogen lamps, 2900K color temperature; power 100W, DC12V, nominal luminous flux 2000lm ~ 3000lm;

2. Smoke density test: measured optical density range of 0% to 100%;

3. Special light source of smoke density and high resolution photoelectric tube receiver can be installed on the external wall;

4. Test room equipped with doors and windows sealed structure;

5. The standard power is 100W and voltage is DC 12V for the light source;

6. Optical calibration system: 0 to 100% point calibration;

Combustion sources:

1. Ethanol 90% ± 1%; methanol 4% ± 1%; water, 6% ± 1%;

2. Alcohol burning box;

3. The distance between alcohol burning box and the ground is 100mm + 10mm;

Control systems:

1. The computer control system, Labview special test software; artificial intelligence control interface,

2. Power regulator precision is ±0.01V

3. Automatic ignition system, automatic timing;

4. Experimental data can be automatic storage, are free to query;

5. With timing reminders;

Specification:

Model	STD-IEC61034
Size	3.450(W)×3.160(D)×3.450(H)mm
Table size	600(W)×750(D)×1.600(H)mm
Power	AC 220V, 50/60Hz, 20A
Weight	2.500kg
Manual	Provided
Other requirements	Computers, compressed gases, vacuum cleaner

Other supplier products

	Cleveland Open Cup Auto Flash Point Analyser, ISO2592，auto ignition flash point equipment	Products: The instrument complies with ISO2592 "petroleum products of flash and fire assay (Cleveland open cup)," the other standard methods, the ...
	Rattle tester	Bell Rattle Toy Tester： Also known as: Sound-emitting toy tester Toy test template AB Anti-choking test device Simulates children's oral cavit...
	Helmet Wearing Height Testing Machine	The helmet wearing height testing machine is a testing device used to evaluate the comfort and safety performance of helmets. It precisely measures...
	Circular Sample Cutter Tester	The Circular Sample Cutter Tester is a manual precision instrument designed to cut standardized circular specimens from textiles, fabrics, papers, ...
	4000 Hours Test Kit For Xenon light WeatherOmeeter	Introduction 4 thousand hours xenon lamp tester spare package, allows your device has a longer time to use. In order to get the best use effect, we...

供应产品

Same products

	Single Burning Item，test apparatus， BS EN 13823	卖方: Standard International Group (HK) Limited	Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) perform...
	Room Corner Tester，Room corner fire test equipment， ISO 13784	卖方: Standard International Group (HK) Limited	Introduction According to ISO9705 of building materials fire prevention performance standards, t...
	Smoke Density Chamber， ISO 5659，Smoke density testing equipment	卖方: Standard International Group (HK) Limited	Introduction The main principle is to measure smoke density in a particular space, cable or mate...
	LIFT, IMO Spread of Flame Apparatus，ISO 5658，flame propagation tester	卖方: Standard International Group (HK) Limited
	Wire Fire Resistance Test Machine, IEC 60331， Fireproof Testing for Cable Insulation	卖方: Standard International Group (HK) Limited	Description: Fire-resistant cable refers to the cable that can keep a safe running time in the c...