Photovoltaic Ammonia Test Chamber
Applications
The Photovoltaic Ammonia Test Chamber is a testing device designed to evaluate the corrosion resistance of photovoltaic modules in ammonia environments, ensuring their long-term stable operation in harsh conditions such as industrial or agricultural settings.
Standards
IEC 62716: Photovoltaic (PV) modules—Ammonia corrosion testing (The core standard for this equipment).
IEC 61701: Salt mist corrosion testing of photovoltaic (PV) modules.
IEC 60068-2-52: Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution).
GB/T 2423.17 / GB/T 2423.18: Environmental testing for electric and electronic products—Salt mist testing methods.
IEC Draft 82/722/CDV: Specific requirements for integrated salt mist and ammonia gas exposure sequences.
Features
This equipment can independently perform all test procedures required by IEC 61701 and IEC Draft Standard 82/722/CDV. Specifically, spray testing at severity levels 1-6. damp heat storage, standard atmospheric environment testing, and sample cleaning phases are all completed within the NaCl corrosion chamber. Ammonia spray testing, damp heat storage, spray washing, and drying can all be performed within the NH3 corrosion chamber.
Parameters
| Item | Specifications |
|---|---|
| NH₃ Concentration | 0–10000 ppm (adjustable) |
| Ammonia Concentration Resolution | ±1 ppm |
| Temperature Control Range | 15°C ~ 70°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Temperature Deviation | ≤ ±1.0°C |
| Temperature Uniformity | ≤ ±2°C |
| Humidity Control Range | 40% ~ 100% RH (adjustable) |
| Humidity Deviation | ≤ ±2% RH |
| Humidity Uniformity | ≤ ±3% RH |
| Test Accuracy | ±2% |
Accessories
1.Ammonia Gas Dosing System: Precision mass flow controllers for accurate gas injection.
2.Ammonia Concentration Sensor: High-precision electrochemical or laser-based gas detectors.
3.Specimen Racks: Non-reactive, adjustable holders designed to support full-sized PV modules at standard angles.
4.Exhaust Scrubber Unit: A chemical neutralization system to safely treat ammonia-laden air.
5.NaCl Spray Module: Integrated nozzles and reservoir for salt mist phases (Standard Severity 1-6).
6.Deionized Water Rinse: Internal spray bars for automated sample cleaning between test stages.
Test Procedures
1.Preparation
Sample Preparation: Clean samples and secure them on the sample rack, ensuring they do not touch each other.
Solution Preparation: Prepare a 5% NaCl solution (pH 6.5-7.2) according to the standard.
2.Power-On Test
Power Connection: Connect the power supply and turn on the main switch.
3. Test Operation
Start Test: After confirming parameters are correct, press the “Start” button.
Spray Inspection: Once temperature is reached, the spray system will automatically activate. Observe spray uniformity.
4. Test Completion
Shutdown Procedure: Turn off the spray switch. Allow cooling to below 40°C before disconnecting power.
Sample Removal: Remove specimens for corrosion assessment.
在线联系供应商
Other supplier products
 |
Spontaneous Combustion Tester for Solids | Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test ... |
 |
Knee Joint Prostheses Wear Tester | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
 |
Ink printing proof press | How it works: Ink printing proof machine is mainly based on the principle of printing reproduction, through the simulation of the press pressure, ... |
 |
Sun Protection Factor Tester(UV proof tester) | Introduction: The sun protection factor tester is is also aUV proof tester,mainly used to test and analyze sunscreen products. The instrument can ... |
 |
Infusion Set Positive Pressure Leakage Tester | Application This tester is designed for positive pressure leakage testing of medical infusion devices during quality control and compliance verifi... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
