Shoelace eye wear testing machine
Main uses:
The shoelace eye wear testing machine is mainly used to test the wear resistance of shoelace and shoe eye under repeated friction. The device evaluates its durability and service life by simulating the friction action of the shoelace against the eye of the shoe during actual use. The test results can be used for the quality control of footwear manufacturing enterprises, the research and development of new shoe types and the performance testing of footwear products by quality inspection institutions.
Meet the standard:
SATRA TM93
DIN4843
QB/T 2226
SATRA TM 154
BS 5131:3.6:1991
ISO22774
Technical parameters:
Sample group number: generally multi-group, such as 6 groups, in order to test multiple samples at the same time, improve work efficiency.
Test speed: indicates the moving speed of the fixture during the test, generally 60±3 times/min or 100±5 times/min, the specific speed can be set according to the test requirements and standards.
Test times: A wide range of test times can be preset, such as 0-99999999 times, to ensure that various test needs can be met. During the test, the device automatically stops when the preset number of times is reached.
Test load: Used to simulate the tension of shoelaces during use, generally 250g or 455±5g, the specific load can be set according to test requirements and standards.
在线联系供应商
Other supplier products
 |
Diaper impurity detector | The diaper impurity detector is used to detect the impurities remaining inside the diaper under a certain strong light irradiation. Meet the sta... |
 |
Sweating Thermal Manikin/ Thermal Comfort Testing Manikin / Heat and Sweat Simulation Manikin | Introduction The sweating thermal manikin test system simulates the physical mechanism and heat exchange from the outside world. Obtain the thermal... |
 |
Rapid crack growth testing machine | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid c... |
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester/ IEC 61241-2-3 Dust Ignition Tester/ MITC Dust Explosion Tester | Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device thro... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
