Skein Length Tester
Standards:
GB/T 4743 Textiles－Yarn from packages－Determination of linear density (mass per unit length) by the skein method GB/T 14343 Testing method for linear density of synthetic filament yarns GB/T 6838 Testing method for sewing threads ISO 2060 Textiles-Yarn from packages-Determination of linear density (mass per unit length)-Skein method ASTM D1907 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
Applications:
The instrument is used to accurately measure the length of the yarn, for the determination of the yarn density or count of the yarn and the yarn strength test.
Product Information:
Features
◆OEM modeling
◆True single-chip microcomputer control, digital circuit, start and stop smoothly. You can design parameters. Besides, it is real-time speed, and the whole machine is no contact relay
◆It can be set to stop the first 1 ~ 5 laps in advance to slow down to greatly avoid the phenomenon of punching, mature and reliable electrical circuit: start and stop smooth, low noise operation, accurate circle, no ring phenomenon, good reliability, low failure rate
◆And the microcontroller set as one of the electronic counter.
◆With real-time speed function
◆Continuous step-less speed regulation
Technical Parameters
| Items | Parameters |
| Frame perimeter | G171C：1000mm± 1mm G171E：54in± 1/16in(export only) |
| Single yarn tension range | 0~100cN/Single yarn |
| Shake yarn traverse reciprocating width | 35mm |
| Test tube can be tested at the same time | 6 |
| Dimensions | 780×660×480mm(L×W×H) |
在线联系供应商
Other supplier products
 |
KES - FB2 - S Bending Tester | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex... |
 |
Static Honest Meter | Standards: JIS L 1094 GB/T 12703 Applications: Static Honest Meter is a measuring instrument for attenuation of static electricity, most a... |
 |
10kN Universal Testing Machine ISO 13934-1 ASTM D5587 | The electronic universal testing machine is a classic and practical model developed by our company, and it is also the mainstream model currently p... |
 |
Sand - Falling Testing Machine for Motorcycle Helmets | Main Purposes It is mainly used to test the abrasion - resistance of the lenses of helmet goggles and evaluate their ability to resist particle - ... |
 |
Creep testing machine with full incision | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
