Skein Length Tester
Standards:
GB/T 4743 Textiles－Yarn from packages－Determination of linear density (mass per unit length) by the skein method GB/T 14343 Testing method for linear density of synthetic filament yarns GB/T 6838 Testing method for sewing threads ISO 2060 Textiles-Yarn from packages-Determination of linear density (mass per unit length)-Skein method ASTM D1907 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
Applications:
The instrument is used to accurately measure the length of the yarn, for the determination of the yarn density or count of the yarn and the yarn strength test.
Product Information:
Features
◆OEM modeling
◆True single-chip microcomputer control, digital circuit, start and stop smoothly. You can design parameters. Besides, it is real-time speed, and the whole machine is no contact relay
◆It can be set to stop the first 1 ~ 5 laps in advance to slow down to greatly avoid the phenomenon of punching, mature and reliable electrical circuit: start and stop smooth, low noise operation, accurate circle, no ring phenomenon, good reliability, low failure rate
◆And the microcontroller set as one of the electronic counter.
◆With real-time speed function
◆Continuous step-less speed regulation
Technical Parameters
| Items | Parameters |
| Frame perimeter | G171C：1000mm± 1mm G171E：54in± 1/16in(export only) |
| Single yarn tension range | 0~100cN/Single yarn |
| Shake yarn traverse reciprocating width | 35mm |
| Test tube can be tested at the same time | 6 |
| Dimensions | 780×660×480mm(L×W×H) |
Send product request
Other supplier products
 |
Helmets Designated Protection Areas Tester/ Head protection zone testing equipment/ headgear critical impact area testing machine | In high-risk environments, a helmet is often the most critical piece of personal protective equipment (PPE), offering a vital barrier against impac... |
 |
Paper and cardboard crease stiffness meter | Paper and cardboard crease stiffness meter - Other test instrument - standard Product Introduction: ZY-TDY300 microcomputer bending stiffness tes... |
 |
Safety Helmets Against Molten Metal Splashing Tester/ safety helmet liquid metal splash test equipment / Helmet molten metal splash tester | Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (Draft Standard) GB 2811-2019: Head Protection –... |
 |
High - speed Pellet Impact Testing Machine for Helmet Goggles | Standards: SNELL SA/K2010, EN 166, EN 168, ANSI Z87.1, MIL - PRF - 32432 Applications: To test the impact - resistance performance of glas... |
 |
Standard Helmet Visual Field Tester | Standard Helmet Visual Field Tester - Other test instrument - standard Standards: EN1078:2023 Applications: 1. Used for marking test poin... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
