SYRINGE MOLD/MOULD

LINKPLUS provide precision molds used in manufacturing of each components of the various syringes such as disposable syringe, Insullin syringe, safety syringe, AD syringe. Including barrel, plunger, gasket. It's customizable according to customer production need. Our syringe molddesign is reasonable, with a sturdy structure and stable performance, which can greatly improve production efficiency and mold service life.

WHAT IS SYRINGE MOLD USED FOR?

Syringe moldingis a specialized tool used in the manufacturing of syringes. It is designed to produce precise and consistent shapes of plastic or glass components that make up the syringe, including the barrel, plunger, needle cap, needle hub and so on.

HOW DO YOU USE SYRINGE MOULD?

Steps for mold installation.

1

Confirm that the injection molding machine power is turned on.

2

Click the manual button of the injection molding machine to put it in manual mode.

3

Click the oil pump button of the injection molding machine to start the oil pressure system of the injection molding machine.

4

Transport the molds in place and confirm that they match the production accessories.

5

Use a sling to slowly lift the mold slightly above the injection molding machine, and move the sling bracket so that the mold is above the installation position. Be careful not to cause the mold to collide with the surveillance camera and robotic arm.

6

Slide the protective sleeve of the injection molding machine guide pillar to the appropriate position and slowly lower the mold. The operator should support the top of the mold to avoid it Intense shaking. The operator must control the mold and prohibit it from hitting the guide pillar. When the guide pillar is hit, it will cause concave and convex deformation, Damaging the sealing of the oil pressure system.

7

Lower the mold to the appropriate position, install the positioning flange and protective ring, adjust the mold and sling bracket to make the mold flange and protective ring fit with the injection hole of the injection molding machine.

8

Close the sliding doors on both sides of the injection molding machine, click the mold adjustment button of the injection molding machine, and enter the mold adjustment state.

If you are looking for a reliable medical molding manufacturer, don't hesitate to contact us!

Other supplier products

	HYPODERMIC NEEDLE MOLD	Welinktech Hypodermic NeedleMolds are specifically designed to produce needles for syringes that are used for various medical applications. These m...
	SAFETY SYRINGE MOLD	LINKPLUS Safety syringe injection moldingare designed to manufacture syringes with built-in safety mechanisms. These molds come in different shapes...
	THREE PART SYRINGE BARREL MOLD	It is designed for various types of three-part syringe barrel.including luer slip, luer lock and dual-structural syringe. (1ml, 2ml, 2.5ml, 3ml, 5m...
	SYRINGE MOLD/MOULD	LINKPLUS provide precision molds used in manufacturing of each components of the various syringes such as disposable syringe, Insullin syringe, saf...
	INSULIN PEN NEEDLE MOLD	pen insulin syringemolds are used in the production of insulin pen needles. These molds are typically made of high-quality steel or aluminum to ens...

供应产品

Same products

	RFID 动物标签	卖方: XIUCHENG RFID	尺寸：1.25 X 7mm / 1.4 X 8mm / 2.12 X 8mm /2.12 X 12mm / 3 X 15mm / 4 X 32mm RF 接口：ISO 11784/11785 ...
	RFID microchip implant	卖方: XIUCHENG RFID	Dimension:1.25 X 7mm / 1.4 X 8mm / 2.12 X 8mm /2.12 X 12mm / 3 X 15mm / 4 X 32mm RF Interface:IS...
	Multi Channel Syringe Pump	卖方: Nanjing Runze Fluid Control Equipment Co.,Ltd	Multi Syringe Pump is a precision syringe pump specially designed for high precision liquid handl...
	Mini Peristaltic Pump	卖方: Nanjing Runze Fluid Control Equipment Co.,Ltd	Small oem peristaltic pumps BJ-RZ1030-4 was composed of high precision stepper motor to achieve r...
	Miniature Peristaltic Pump	卖方: Nanjing Runze Fluid Control Equipment Co.,Ltd	Miniature Peristaltic Pumps head is very high cost performance model for small flow rate applicat...