.

Light pole cut to length line

light Pole plate cut to length line is used to cut coil steel into section of light pole plate. normal the light pole, high mast pole is in taper shape. we shall use the light pole taper shearing machine to cut plate into taper shape. the cnc tandem hydraulic press brake will form it into conic or octagonal shape pole.

Light Pole Production Process description

Light pole CNC Tandem Press Brake

Light Pole Plate Cut to length line

Light Pole CNC Flame / Plasma Cutting Machine

Hydraulic shear for pole base cutting

Pole Base plate CNC flame cutter

Light Pole Shut-Welding Machine

Pole Straightening Machine

CNC LIGHT POLE ELECTRIC DOOR CUTTING MACHINE

Drilling machine for High mast pole base

Conic Light pole Press brake tool



在线联系供应商

至: WUXI JINQIU MACHINERY CO.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Hydraulic guillotine shear
Hydraulic guillotine shear 1. Hydraulic Guillotine shear Adopting rolling guide way with three-point support, cutting accuracy could be maintained well,2. Hydraulic guillotin...
CNC Roll forming machine
CNC Roll forming machine 1, Summarize:Structure type four-roll machine, on the main drive up roller through the hydraulic motor with the roller,and this up roller is fixed,...
High mast pole / Power Transmision pole Press brake
High mast pole / Power Transmision pole Press brake To make high mast pole and power transmission pole, 1000~1600T tandem press brake is the common capacity forming machine. The machine can be used t...
cnc hydraulic press brake
cnc hydraulic press brake • European CNC hydraulic press brake controller with complete bending computations and tool library• Ideal for multi-bending of complex s...
light pole shut welding machine
light pole shut welding machine LPW-450/14000 is suitable for one piece type polygonal and circle taper light pole. it is automatic welding line, the dolly with speed adjustable m...
供应产品

Same products

Underwater Pelletizer
Underwater Pelletizer 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin...
Button sewing machine JM-373
Button sewing machine JM-373 卖方: Zhejiang Huaqi Information Technology Co., LTD FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c...
YZH固定式碎石机械臂系统
YZH固定式碎石机械臂系统 卖方: 山东伊润基础工程有限公司 对于固定应用,我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器,我们提供手动和远程转向系统。标准设备的特点是手动转向,比例阀通常安装在固定式液压机械手的底座上。...
铸造锡基轴承合金
铸造锡基轴承合金 卖方: 河南桦创金属材料贸易有限公司 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦(轴套)的轴承材料有粉末冶金、非金属材料和金属材料等,但工业中常选用的还是非铁金属的铸造轴承合金,习惯称为铸造轴承合金...
固定式机械臂
固定式机械臂 卖方: 山东伊润基础工程有限公司 为什么从山东元正行机械设备有限公司购买固定式机械臂。?拥有超过20年的专业生产经验。2.快速高效的售后服务。3.丰富的现场工作经验。4.专业且富有创造力的研发团队。5.中国价格低廉。6.中国的快...