Laser scribing machine
Model Name GSC-50K
Laser wavelength 1064nm
Laser power 50W
Scribing width 50μm
Scribing speed 100mm/s
Scribing accuracy ±10μm
Working area 350x350mm
Temperature control precision 0.5℃
Working power 380V(220V)/50Hz/5kvA
Working table negative pressure absorbing and dust elimination
Cooling method unified rotative homothermal water cooling
Control mode Common
在线联系供应商
Other supplier products
|
|
Laser scribing machine | Model Name GSC-50K Laser wavelength 1064nm Laser power 50W Scribing width 50μm Scribing speed 100mm/s Scribing accuracy ±10&m... |
 |
Solar module EL tester | Model Name 610 Micro-cracks EL Tester Resolution 6.1 million by pixels 3032*2016 Testing Range technogenic contamination, material defects, m... |
 |
Solar module laminator | The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
 |
Solar module tester | Model Name GSS--2012 Lamp Spectrum In line with iec60904-9 spectral Irradiance distribution requirement(AM1.5) Light intensity 100mW/cm2 (cont... |
 |
Semi-automatic solar module laminator | The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
Same products
 |
SHJ Series Twin Screw Extruder | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The SHJ Series Twin Screw Extruder() represents a remarkable evolutionary step in the field of ex... |
 |
Underwater Pelletizer | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin... |
 |
Button sewing machine JM-373 | 卖方: Zhejiang Huaqi Information Technology Co., LTD | FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c... |
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
铸造锡基轴承合金 | 卖方: 河南桦创金属材料贸易有限公司 | 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金... |
