宽带砂光机
MODEL SRP 1300-2
WORKING WIDTH 1300mm
WORKING THICKNESS 2.5-150mm
WORKING LENGTH ≥ 400mm
WORKING PRECISION ±1
ABRASIVE BELT SPEED 20+16m/s
MATERIAL FEEDING SPEED 6-30m/min
FORMER ABRASIVE BELT SIZE(LX D) 2620x1330mm
BACK ABRASIVE BELT SIZE 2620x1330mm
POWER 55+30 kw
WORKING AIR PRESSURE 0.5-0.8MPa
DUST SUCKING SPEED 20-30m/s
NET WEIGHT 11500kg
在线联系供应商
Other supplier products
 |
热压机 | Model BY214×8/5-15IIZ Nominal gross pressure 5000 KN Direction of feeding plate Horizontal Layer Counting 15 layers Distance between h... |
 |
宽带砂光机 | MODEL SR1350D WORKING WIDTH 1350mm WORKING THICKNESS 3-150mm WORKING LENGTH ≥ 400mm WORKING PRECISION ±1 ABRASIVE BELT MOTOR POWER ... |
 |
单板接长机 | TYPE BDJ-II Pressure(KN) 80 ( Kgf/cm2) Unit Pressure 10 Hot platen Size（mm） 1370×70×42 Numbers of Hot platen 2 Number of Cylinder ... |
 |
预压机 | Model BY814×8/4-IIz Nominal Gross Pressure 4000 KN Direction of Feeding Plate Horizontal Opening 1600mm Dimension of Workingbench 2700&... |
 |
刨花机 | Model 9BH-420 9BH-600 9BH-800 Output（kg/h） 400 800 1500 Inlet size（mm） 160*80 200*120 230*230 Knife number 4 4 8 The knife length（mm） 90 150 ... |
Same products
 |
SHJ Series Twin Screw Extruder | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The SHJ Series Twin Screw Extruder() represents a remarkable evolutionary step in the field of ex... |
 |
Underwater Pelletizer | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin... |
 |
Button sewing machine JM-373 | 卖方: Zhejiang Huaqi Information Technology Co., LTD | FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c... |
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
铸造锡基轴承合金 | 卖方: 河南桦创金属材料贸易有限公司 | 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金... |
